2022 Volvo S60 Brakes Owners Manual

volvo logo

2022 Volvo S60 Brakes Owners

volvo S60

Brake fluid – specifications

Brake fluid is the medium in a hydraulic brake system that is used to transfer pressure from e.g. a brake pedal via a master brake cylinder, which in turn acts on the brake calipers.

Prescribed grade: Volvo Original or equivalent fluid compliant with a combination of Dot 45.1, and ISO 4925 class 6.

Note
It is recommended that brake fluid is changed or filled by an authorized Volvo workshop.

Brake functions

The car’s brakes are used to reduce the speed or prevent the car from rolling.
Besides the foot brake and parking brake, the car is equipped with several automatic brake assist functions. These can assist the driver by not needing to keep his/her foot on the brake pedal when at a traffic light, or when starting on an uphill gradient.
Depending on the car’s equipment, the following auto braking functions are available:
  • Automatic brake when stationary (Auto Hold)
  • Hill start assist (Hill Start Assist)
  • Auto braking after a collision
  • City Safety

Automatic braking when stationary

Automatic brake when stationary (Auto hold) means that the driver can release the brake pedal while maintaining a braking effect when the car has stopped at traffic lights or a junction.
When the car has stopped, the brakes are activated automatically. The function can use either a foot brake or a parking brake to hold the car stationary and it works on all gradients. When driving off, the brakes are released automatically if the driver is wearing the seatbelt and/or the driver’s door is closed.
Note
When braking to a standstill on an uphill or downhill slope, the brake pedal should be depressed a little harder before being released to ensure the car does not roll.
The parking brake is activated if
  • the car is switched off
  • the driver’s door is opened
  • the driver’s seatbelt is unbuckled
  • the car has been stationary for a longer time (5-10 minutes).

Auto hold can also change over to the parking brake in other situations.

Symbols in the driver display

Symbol Specification
2022 Volvo S60 Brakes Owners-fig-1
The symbol is illuminated when the function uses the foot brake to keep the car stationary.
2022 Volvo S60 Brakes Owners-fig-2
The symbol is illuminated when the function uses the parking brake to keep the car stationary.

Activating and deactivating the automatic brake at a standstill

The automatic brake function at a standstill is activated using the button in the tunnel console.
2022 Volvo S60 Brakes Owners-fig-3Press the button in the tunnel console to activate or deactivate the function.
The indicator in the button illuminates when the function is activated. The activated function remains even when the car is started next time.

Applicable when switching off

2022 Volvo S60 Brakes Owners-fig-1
If the function is active and holds the car with the foot brake (A-symbol illuminated in the driver display), the brake pedal must be depressed at the same time as the button is depressed in order to deactivate.
  • The function remains deactivated until it is reactivated.
  • When the function is deactivated, hill start assist (HSA) remains active to prevent the car from rolling backward when starting on an uphill gradient.

Auto braking after a collision

  • In the event of a collision in which the activation level is reached for the pyrotechnic seatbelt tensioners or airbags, or if a collision with a large animal is detected, the car’s brakes are automatically applied.
  • This function is to prevent or reduce the effects of any subsequent collision.
  • After a serious collision, there is a risk that it is no longer possible to control and steer the car. In order to avoid or mitigate a possible further collision with a vehicle or an object in the vehicle’s path, the auto braking system is activated automatically and brakes the car in a safe manner.
  • Brake lights and hazard warning lights are activated during braking. When the car has stopped, the hazard warning lights continue to flash and the parking brake is applied.
  • If braking is not appropriate, e.g. if there is a risk of being hit by the following traffic, the system can be overridden by the driver depressing the accelerator pedal.
  • The function assumes that the brake system is intact after the collision.

Help when starting on a hill

  • Hill start assist (HSA) prevents the car from rolling backward when starting on an uphill gradient. When reversing uphill, it prevents the car from rolling forwards.
  • The function means that the pedal pressure in the brake system remains for several seconds while the driver’s foot is moved from the brake pedal to the accelerator pedal.
  • The temporary braking effect is released after several seconds or when the driver starts to drive away.
  • The Hill Start Assist is activated when stopping on a steep slope. The function is available even when the automatic braking and stationary (Auto hold) function is deactivated.

Regenerative braking

The car recovers kinetic energy during braking in order to reduce fuel consumption and emissions.
2022 Volvo S60 Brakes Owners-fig-4
The battery symbol is shown in the driver display when the car is generating power for the battery.
The function is available in all drive modes together with gear position D or M.

Activating brake regeneration

Brake regeneration is activated by gentle pressure on the brake pedal or during engine braking.
Regeneration increases during engine braking when manual gearshift mode M is selected.

Leave a Comment