2023 Volvo S60 Recharge Plug-in Hybrid Lighting
Adjusting light functions via the centre display
Light functions can be adjusted and activated via the centre display.
- Press
in the centre display. - Then tap on Controls.
- Adjust the required function for interior or exterior lighting.
Lighting control
The different lighting controls are used to control both exterior and interior lighting. The left-hand stalk switch activates and adjusts the exterior lighting. You can both activate and adjust the exterior and interior lighting via the centre display.
Exterior lighting
- Rotating ring in the left-hand stalk switch.
- When the car’s electrical system is in ignition position II, the following functions are available for the rotating ring’s different positions:
| Position | Specification |
|---|---|
 |
Daytime running lights.
Main beam flash can be used. |
 |
Daytime running lights and position lamps.
Position lamps when the car is parked. Main beam flash can be used. |
 |
Dipped beam and position lamps.
Main beam can be activated. Main beam flash can be used. |
 |
Front daytime running lights and rear position lamps in daylight.
Dipped beam and position lamps in weak daylight or darkness, or when the front fog lamp and/or rear fog lamp are activated. The Active main beam function can be activated. Main beam can be activated when dipped beam is switched on. Main beam flash can be used. |
 |
Active main beam on/off. |
Volvo recommends that 
mode is used when the vehicle is driven.
Warning
- The car’s lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations.
- The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.
Exterior and interior lighting
You can adjust the exterior and interior lighting in the centre display.
You can adjust the exterior and interior lighting in the centre display.