2023 Volvo C40 Recharge Front Seats Owners Manual

The car’s front seats have a range of setting options in order to enhance comfort. The power seat can be moved forwards/backward and upwards/downwards. The front edge of the seat cushion can be raised/lowered and the backrest inclination can be changed. The lumbar support(Option/accessory) can be adjusted upwards/downwards/forwards/backward. Seat cushion length is adjusted manually.(Option/accessory) Seat adjustment can take place when the car is running and within a certain time after unlocking the door without the car running. Adjustment can also take place within a certain time after the car has been switched off.

Important

The power seats have overload protection that is triggered if any seat is blocked by an object. If this happens, remove the object and then move the seat again.

Adjusting the power(Option/accessory) front seat

Set to a desired sitting position using the control on the front seat’s seating section. Activate the lumbar support(Option/accessory) by pressing the four-way control.

1. Activate and use the lumber support control by pressing the four-way control up/down/forwards/back.
2. Raise/lower the seat cushion front edge by adjusting the control up/down.
3. Raise/lower the seat by means of adjusting the control up/down.
4. Move the seat forward/backward by adjusting the control forward/backward.
5. Change the backrest inclination by adjusting the control forward/backward. Only one movement (forward/back/up/down) can be made at a time. The backrests of the front seats cannot be lowered fully forward.

You can manually adjust the height of the head restraints by pressing in the button.

Manual front seat

The car’s front seats have a range of setting options in order to enhance comfort.

1. Adjust the seat forward/backward by lifting the handle and adjusting the distance to the steering wheel and pedals. Check that the seat is locked after the position has been adjusted.
2. Change the length(Option/accessory) of the seat cushion by pulling the lever up and moving the seat cushion forward/backward by hand.
3. Raise/lower the front edge of the seat cushion(Option/accessory) by pumping up/down.(Only applies to the driver’s seat).
4. Change the lumbar support(Option/accessory) by pressing the button upward/downward/forward/back.
5. Raise/lower the seat by means of pumping the lever up/down.\
6. Change the backrest inclination by turning the control knob.

1. You can manually adjust the height of the head restraints by pressing in the button.

WarningAdjust the position of the driver’s seat before setting off, never while driving. Make sure that the seat is in locked position in order to avoid personal injury in the event of heavy braking or an accident.

Adjusting(Option/accessory) the length of the seat cushion in the front seat

For increased comfort, you can adjust the length of the seat cushion.

Control for seat cushion adjustment.

1. Grip the handle 1n the front of the seat and pull upwards.
2. Adjust the length of the seat cushion.
3. Release the handle and make sure that the seat cushion has reached the correct position.

Adjusting the lumbar support(Option/accessory) in the front seat

The lumbar support is adjusted using a control on the side of the seat cushion.

Four-way button, is located on the side of the seat’s seating section.

The four-way lumbar support is adjusted using the four-way button (the round one) which is located on the side of the seat’s seating section. The lumbar support can be adjusted forwards/backwards and upwards/downwards.

Adjusting the lumbar support

• Press the four-way button-up 1/down 3 to move the lumbar support upwards/downwards.
• Press the front section 4 of the four-way button to increase lumbar support.
• Press the rear section 2 of the four-way button to decrease lumbar support.