Map settings
Settings can be personalized in the following areas:
- Position Format
- Map Display Format
- Show Speed Cameras
- Show Favorites
- Point of Interest (POI)
Position Format
Select Position Format to designate/display the current location on the map using its address or its coordinates:
- Address
- Coordinates and Altitude
Map Display Format
Select Map Display Format to choose background lighting for the map:
- Day – bright colors.
- Night – dark colors for better night vision.
- Auto– the system will switch between Day and Night depending on the ambient light in the passenger compartment.
Speed cameras
Select Show Speed Cameras to display speed cameras on the map.
Favorites
To display Favorites on the map, select.
Point of Interest (POI)
Select POIs to be displayed on the map under Point of Interest (POI). Tap on the desired category, e.g. “Transportation”, and then select show all or specific sub categories. Tap Backor Close to exit the menu.
Settings can be personalized in the following areas:
- Map – manages the content and appearance of the map.
- Route and Guidance – handles guidance and how routes are calculated and displayed.
- Traffic – manages traffic information.
Route settings and guidance
- Settings for how the route is calculated and how guidance is presented in the navigation system are selected here.
- Adjust the volume by turning the volume knob while the voice is speaking.
- SettingsNavigationRoute and Guidance
Settings can be personalized in the following areas:
- Arrival Time Format
- Voice Guidance Level
- Choose Default Route Type
- Route Learning
- Avoidance Settings
- Propose Gas Station
Arrival Time Format
Choose how arrival time will be displayed:
- ETA (estimated time of arrival at the destination)
- RTA (remaining time to arrival at destination)
Times are displayed according to the time zone of the destination.
Voice Guidance Level
- Tap Voice Guidance Level.
- Tap desired voice guidance:
- None (no automatic voice guidance, but guidance can be manually requested once)
- Low (only one message per guidance point)
- Medium (up to 3 messages per guidance point, with limited information provided)
- Full (up to 4 messages per guidance point and all available information provided)
Choose Default Route Type
Select the default type of route to be used:
- Fast
- Eco
- Scenic (highways/freeways are avoided whenever possible; note that this could lead to longer travel times)
It is also possible to display an alternative route while driving.
Route Learning
Select Route Learning to allow data to be collected to optimize route calculations.
Avoid
Tap Avoidance Settings to open a menu of options to automatically avoid (if possible) when calculating a route. Possible selections include tunnels, ferries, congestion charge zones, etc.
Suggest service station
Tap Propose Gas Station to activate or deactivate the display of suggestions for nearby service stations in the instrument panel when the fuel level is low.
Traffic information settings
- The following settings determine how traffic information is presented in the navigation system.
Settings can be personalized in the following areas:
- Show and Handle Traffic Events
- Avoid Traffic Events
- Show Free-Flowing Traffic
- Real-Time Traffic Information
Show & Handle Traffic Events
Select to display traffic events on the map and use this information to calculate routes:
- None
- Major
- All types
Avoid Traffic Events
Select to avoid traffic problems when calculating routes.
- Never
- Ask – (suggestions for alternate routes will be provided when available during the trip)
- Always
Show Free-Flowing Traffic
Select Show Free-Flowing Traffic to show this on the map.
Using RTTI
Select Real-Time Traffic Information to use enhanced traffic information when the vehicle is connected to the Internet (RTTI).