2022 Land Rover New Range Rover Head Restraints
HEAD RESTRAINTS SAFETY
Make sure to read and fully understand the relevant warnings before using the features in this section. Failure to observe warnings and cautions may result in vehicle damage, injury, or DEATH in the event of an accident.
Head restraints are designed to support the head, not the back of the neck. The head restraint must be positioned correctly to restrain rearward movement of the head in a collision. An incorrectly adjusted head restraint increases the risk of death or serious injury in the event of a collision.
While stationary, adjust the head restraint so that the top of the head restraint is above the centerline of the head. An incorrectly adjusted head restraint increases the risk of death or serious injury in the event of a collision.
Do not drive or carry passengers with the head restraints removed from occupied seats. The absence of a correctly adjusted head restraint increases the risk of neck injury in the event of a collision.
Never adjust the head restraints while the vehicle is in motion. Doing so could potentially cause a loss of vehicle control and personal injury.
Always store a removed head restraint securely. In the event of an accident, an unsecured object could potentially cause serious injury or death. Head restrints are fitted to all front and rear seats.
FRONT HEAD RESTRAINTS
Make sure to read and fully understand the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
To adjust the manual head restraints:
- To raise the head restraint, pull it upward.
- Press the button on the side of the head restraint to move the head restraint downward. Simultaneously press down on the head restraint.
To adjust the head restraint position: Press the locking button on the side of the restraint. Simultaneously, move the restraint horizontally (1) and vertically (2) until the desired position is achieved.
To adjust the electric head restraints, see ELECTRIC SEATS.
There is no angle adjustment on front head restraints.
REAR HEAD RESTRAINTS
Make sure to read and fully understand the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
To adjust the manual head restraints:
- To raise the head restraint, pull it upward.
- Press the button on the side of the head restraint to move the head restraint downward. Simultaneously press down on the head restraint.
To adjust the head restraint position: Press the locking button on the side of the restraint. Simultaneously, move the restraint horizontally (1) and vertically (2) until the desired position is achieved.
To raise or lower the second row center head restraint:
- Pull upward and raise to the highest position. The head restraint locks into position.
- Press the button located on the stem collar and simultaneously push the head restraint downward to lower.
To adjust the electric head restraints, see ELECTRIC SEATS.
There is no angle adjustment on electric head restraints.
To adjust the executive head restraints, see EXECUTIVE CLASS SEATS.
To tilt the rear executive head restraints: Pull the head restraint forward and upward using the lower edge, until the desired position is achieved.
The third row head restraints can be folded.
To tilt the third-row head restraints: Press the button (1) and lower the head restraint forward (2).
WINGED HEAD RESTRAINTS
To adjust the winged head restraints:
- Pull the wings forward into the first or second position.
- Tilt the head restraint to adjust the angle.
- For rear height, see EXECUTIVE CLASS SEATS.
Supplementary comfort pillows, where supplied, should only be used when the vehicle is stationary.
FRONT HEAD RESTRAINT REMOVAL
Make sure to read and fully understand the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
Do not drive or carry passengers with the head restraints removed from an occupied seat. The absence of a correctly adjusted head restraint increases the risk of neck injury in the event of a collision.
Always store a removed head restraint securely. In the event of an accident, an unsecured object could potentially cause serious injury or death.
Only manual head restraints can be removed if required.
Two people are required when removing a front head restraint.
To remove a front head restraint:
- Move the head restraint to its uppermost position.
- Using two hands, press down on each of the collars located on top of the seat, to engage hidden buttons inside the seat.
- While the collars are pressed down, the second person should lift out the head restraint.
Make sure the head restraint is refitted before the seat is used by a passenger.
To refit the front head restraint:
- Press the button on the side of the head restraint. While holding the button, push the stems into the head restraint as far as they will go.
- Line the stems up with the collar holes on the seatback. Push the head restraint down until both stems engage into a locked position.
REAR HEAD RESTRAINT REMOVAL
Make sure to read and fully understand the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
Do not drive or carry passengers with the head restraints removed from an occupied seat. The absence of a correctly adjusted head restraint increases the risk of neck injury in the event of a collision.
Always store a removed head restraint securely. In the event of an accident, an unsecured object could cause serious injury or death.
Only manual head restraints may be removed, if required. See CHILD SAFETY LOCKS.
To remove a manual head restraint:
- Raise the head restraint to its uppermost position and press the button on the locking collar.
- Lift the restraint out of the seatback.
Make sure the head restraint is refitted before the seat is used by a passenger.
To refit a manual head restraint:
- Make sure the restraint is facing the correct direction.
- Insert the stems of the head restraint into the sockets on the seatback.
- Push the restraint downward until at least the first click.