2023 Land Rover Range Rover Evoque Mirrors
DOOR MIRRORS
To adjust the door mirrors:
- Mirror selector buttons: Press to select the left or right mirror.
- Mirror adjustment control: Move up, down, left, or right to adjust the mirror’s glass position.
- Press both mirror selector buttons together to fold and unfold the mirrors (power-fold option).
The door mirrors can be configured by a retailer/authorized repairer to automatically fold when the vehicle is locked, and unfold when it is unlocked.
The mirrors can be adjusted for up to 5 minutes after the ignition is switched off, provided the driver’s door is not opened.
Power-folding is a vehicle-specific feature. The power-fold feature operates only if the vehicle’s speed is below 70 mph (113 km/h).
The door mirror heaters operate automatically, according to the external temperature and the heated rear screen operation.
An amount of knock protection is designed into the door mirrors. If a door mirror is accidentally knocked inwards or outwards, the mirror head disengages from the folding mechanism. To re-engage the mechanism, fold, then unfold the door mirror using the button.
If the door mirrors are folded using the buttons, they do not unfold when the vehicle is unlocked.
If the mirrors are already folded when the vehicle is locked, the mirrors do not unfold when the vehicle is unlocked. Garage mode prevents the mirrors from being damaged when unfolding, e.g., in a tight garage spot. If the mirrors remain folded, they automatically unfold at 40 km/h (25 mph).
MIRROR DIP WHEN REVERSING
Mirror dip can be enabled or disabled via the Vehicle settings menu.
To access the Mirror Dip on Reverse settings:
- Touch the settings icon¹ from any screen.
- Touch the ALL soft key.
- Touch Vehicle.
- Touch Convenience.
- Touch Mirrors.
- Mirror Dip on Reverse: Toggle on or off.
- Touch the exit icon², after selection, to return to the previously displayed screen.
Selecting Reverse (R) causes the door mirrors to automatically adjust, providing an improved viewing angle for reversing.
The dipped position of the door mirrors is a preset position. In R, the door mirrors can be adjusted and the new position can be saved.
The new door mirror dip position can only be saved in R.
When the vehicle is in R, press the memory save button (M). Select either memory 1, 2, or 3 to save the reverse mirror dip position to the corresponding memory. See SEAT POSITION MEMORY.
Three different reverse mirror dip positions can be saved. Use the memory recall feature to recall the saved positions.
When the gear selector is moved out of R, the door mirrors return to the previous position.
Mirror dip is a vehicle-specific feature. If the vehicle’s speed exceeds 7.5 mph (12 km/h) in R, the mirrors return to the normal position for enhanced visibility.
Settings icon.¹
Exit icon.²
CLEARSIGHT REAR-VIEW MIRROR
The ClearSight rear-view mirror has a limited view. The driver is responsible for detecting obstacles and estimating the vehicle’s distance from them when maneuvering the vehicle. Driver distraction can lead to accidents, potentially causing serious injury or death.
When cleaning the ClearSight rear-view mirror glass, use a paper towel, or similar material, dampened with glass cleaner. Do not spray glass cleaner directly on to the mirror, as that may cause the liquid cleaner to enter the mirror housing and damage the mirror.
The image quality displayed on the ClearSight rear-view mirror can be affected by external light sources and artefacts on the rear-facing camera lens, such as dirt, water droplets, insects etc. Make sure the rear-facing camera lens is clean. See SENSORS AND CAMERAS.
The ClearSight rear-view mirror uses a camera and a mirror-integrated display. The ClearSight rear-view mirror camera mode displays a wide-angle camera view of the area behind the vehicle. Alternatively, use the ClearSight rear-view mirror as a conventional mirror.
- HomeLink® buttons. See RADIO FREQUENCY (RF) TRANSCEIVER.
- ClearSight rear-view mirror mode switch.
- ClearSight rear-view mirror settings button.
- ClearSight rear-view mirror settings adjuster button – Down.
- ClearSight rear-view mirror settings adjuster button – Up.
To enable the ClearSight rear-view mirror camera mode, pull the ClearSight rear-view mirror mode switch (2) rearward.
Push the mode switch (2) forward to disable.
The user can adjust the following ClearSight rear-view mirror settings:
- Brightness: Press the settings button (3). Adjust the brightness levels using the up (5) and down (4) buttons.
- Height: Press the settings button twice. Adjust the height using the up (5) and down (4) buttons.
If a ClearSight rear-view mirror system fault is detected, the rear-view mirror displays a camera-disabled icon.¹ If the camera display is not available, place the ClearSight rear-view mirror in to mirror mode, and contact a retailer/authorized repairer.
HomeLink® is a registered trademark of Gentex Corporation.
Camera disabled icon.¹