2022 Kawasaki Z125 Pro Throttle Control System
Throttle Control System
Throttle Grip
Throttle Grip Free Play Inspection
- Check that the throttle grip moves smoothly from full open to close, and the throttle closes quickly and completely by the return spring in all steering positions.
- If the throttle grip does not return properly, have the throttle control system checked by an authorized Kawasaki dealer.
- Check the throttle grip free play by turning back and forth.
A. Throttle Grip
B. Throttle Grip Free Play
Throttle Grip Free Play
2- 3 mm (0.08 0.12 in.)
If there is improper play, adjust it.
Throttle Grip Free Play Adjustment
- Slide the dust cover.
- Loosen the locknut at the upper end of the throttle cable.
- Turn the adjuster until 2— 3 mm (0.08 0.12 in.) of throttle grip free play is obtained.
- Tighten the locknut.
A. Dust Cover
B. Locknut
C. Adjuster
D. Throttle Cable
- Slide the dust cover to the original position.
- With the engine idling, turn the handlebars to each side. If handlebars movement changes the idle speed, the throttle cable may be improperly adjusted or incorrectly routed, or it may be damaged. Be sure to correct any of these conditions before riding.
WARNING
Operation with improperly adjusted, incorrectly routed, or damaged cable could result in an unsafe riding condition. Be sure the control cable is adjusted and routed correctly and is free from damage.