2022 Kawasaki KLX300R Electrical Accessory Connectors
Electrical Accessory Connectors
The electric power of the battery can be used through the electrical accessory connectors.
NOTE
- Some models require a relay to use the electrical accessory connectors.
- The electrical accessory connection to the connectors should be done by an authorized Kawasaki dealer.
Accessory Connectors 
A. Accessory Connectors (Taped to the Harness)
NOTICE
This accessory circuit has 15 A fuse for the accessory connectors. Always install a fuse 15 A or less for the circuit. Do not connect more than 85 W of load to this accessory circuit or the battery may become discharge, even with the engine running.
Fuse
WARNING
Substituting fuses can cause the wiring to overheat, catch fire and/or fail. Do not use any substitute for the standard fuse. Replace the blown fuse with a new one of the correct capacity, as specified on the fuse box and main fuse.
Main Fuse
The main fuse is placed in the starter relay behind the left side cover. To access the main fuse, disconnect the negative (-) cable from the battery terminal to prevent electrical short, then disconnect the connector from the starter relay. If a fuse blows during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper amperage.
A. Fuse Box
B. Connector
C. Main Fuse
D. Spare Fuse
A. Normal
B. Failed
Accessory Fuse
Fuse for an electrical accessory is arranged in the fuse box located under the seat. If the fuse blows during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper amperage.
NOTE
The electrical accessory connection to the connectors should be done by an authorized Kawasaki dealer.
A. Accessory Fuse
B. Spare Fuse