2022 Jeep Wrangler Uconnect Settings
UCONNECT SETTINGS
- The Uconnect system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel. These buttons allow you to access and change the Customer Programmable Features. Many features can vary by vehicle
- Buttons on the faceplate are located below and/or beside the Uconnect system in the center of the instrument panel. In addition, there is a SCROLL/ENTER control knob located on the right side. Turn the control knob to scroll through menus and change settings. Push the center of the control knob one or more times to select or change a setting.
- Your Uconnect system may also have SCREEN OFF and MUTE buttons on the faceplate.
- Push the SCREEN OFF button on the faceplate to turn off the Uconnect screen. Push the button again or tap the screen to turn the screen on.
- Press the Back Arrow button to exit out of a Menu or certain option on the Uconnect system.
CUSTOMER PROGRAMMABLE FEATURES
Uconnect 4C/4C NAV Touchscreen And Faceplate Buttons
- Uconnect Buttons On The Touchscreen
- Uconnect Buttons On The Faceplate
For the Uconnect 4 With a 7-inch Display and the Uconnect 4/4C/4C NAV With 8.4-inch Display
Press the Apps button, then press the Settings button on the touchscreen to display the menu setting screen. In this mode the Uconnect system allows you to access programmable features.
NOTE
- Depending on the vehicle’s options, feature settings may vary.
- All settings should be changed with the ignition in the ON/RUN position.
When making a selection, only press one button at a time to enter the desired menu. Once in the desired menu, press and release the preferred setting option until a checkmark appears next to the setting, showing that the setting has been selected. Once the setting is complete, press the X button on the touchscreen to close out of the settings screen. Pressing the Up or Down Arrow button on the right side of the screen will allow you to toggle up or down through the available settings.
Language
When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen language. The available setting is:
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Language | This setting will change the language of the Uconnect system and Instrument Cluster Display. The available languages are English, Français, and Español. |
Display
When the Display button is pressed on the touchscreen, the system will display the options related to the theme (if equipped), brightness, and color of the touchscreen. The available settings are:
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Display Mode |
This setting will allow you to set the brightness manually or have the system set it automatically. The “Auto” setting has the system automatically adjust the display brightness. The “Manual” setting will allow the user to adjust the brightness of the display. |
|
Display Brightness With Headlights ON/Brightness |
This setting will allow you to set the brightness when the headlights are on. To access this setting, Display Mode must be set to Manual. The “+” setting will increase the brightness; the “-” will decrease the brightness. |
|
Display Brightness With Headlights OFF/Brightness |
This setting will allow you to set the brightness when the headlights are off. To access this setting, Display Mode must be set to Manual. The “+” setting will increase the brightness; the “-” will decrease the brightness. |
| Setting Name | Description |
| Set Theme | This setting will allow you to change the display theme. |
| Touchscreen Beep | This setting will allow you to turn the touchscreen beep on or off. |
| Control Screen Timeout | This setting allows you to set the Control Screen to turn off automatically after five seconds or stay open until manually closed. |
| Navigation Turn-by-Turn Displayed in Cluster | This setting will display navigation prompts in the Instrument Cluster Display. |
| Phone Pop-ups Displayed in Cluster | This setting will display smartphone notifications and messages in the Instrument Cluster Display. |
| SiriusXM® Travel Link Weather Alerts | This setting will turn the weather alerts on or off. |
Units
When the Units button is pressed on the touchscreen, the system displays the different measurement options. The selected unit of measurement will display in the instrument cluster display and Navigation system (if equipped). The available settings are:
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| US | This setting will change the unit of measurement on the display to US. |
| Metric | This setting will change the unit of measurement on the display to Metric. |
|
Custom |
This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), “Temperature” (°C or °F), and “Torque” (Nm or lb-ft) units of measurement independently. |
Voice
When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Voice Response Length |
This setting will change the response length for the Voice Recognition system. The “Brief” setting provides a shortened audio description from the system. The “Detailed” setting provides the full audio description from the system. |
|
Show Command List |
This setting will allow you to turn the Command List on or off. The “Always” setting will always show the Command List. The “With Help” setting will show the Command List and provide a brief description of what the command does. The “Never” setting will turn the Command List off. |
Clock
When the Clock button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Sync Time With GPS | This setting will sync the time to the GPS receiver in the system. The system will control the time via the GPS location. |
|
Set Time Hours |
This setting will allow you to set the hours. Sync Time With GPS must be off for this setting to be available. The “+” setting will increase the hours.
The “-” setting will decrease the hours. |
| Setting Name | Description |
|
Set Time Minutes |
This setting will allow you to set the minutes. Sync Time With GPS must be off for this setting to be available. The “+” setting will increase the minutes. The “-” setting will decrease the minutes. |
|
Set Time And Format/Time Format |
This setting will allow you to set the time format (AM/PM). Sync Time With GPS must be off for this setting to be available. The “12 hrs” setting will set the time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour format. |
| Show Time in Status Bar/Show Time Status | This setting will place the time in the radio’s status bar. |
Camera
When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.
NOTE: Depending on the vehicle’s options, feature settings may vary
| Setting Name | Description |
| ParkView Backup Camera Delay | This setting will add a timed delay to the ParkView Backup Camera when shifting out of REVERSE. |
| Active ParkView Backup Camera Guidelines | This setting will turn the Active ParkView Backup Camera Guidelines on or off. |
| Fixed ParkView Backup Camera Guidelines | This setting will turn the Fixed ParkView Backup Camera Guidelines on or off. |
| Forward Facing Camera Guidelines | This setting will turn the Forward Facing Camera Guidelines on or off. |
Safety & Driving Assistance
When the Safety & Driving Assistance button is selected on the touchscreen, the system displays the options related to the vehicle’s safety settings. These options will differ depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder; the available options related to that feature will then display on the screen.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Forward Collision Warning Sensitivity — Located In Automatic Emergency Braking Submenu |
This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The “Medium” setting will have the FCW system signal when an object is in view, and the possibility of a collision is detected. The “Near” setting will have the FCW system signal when the object is closer to the vehicle. The “Far” setting will have the FCW system signal when an object is at a far distance from the vehicle. |
|
Forward Collision Warning — Located In Automatic Emergency Braking Submenu |
This setting will turn the Forward Collision Warning (FCW) system on or off. The “Off” setting will deactivate the FCW system. The “Warning Only” setting will provide only an audible chime when a collision is detected. The “Warning
+ Active Braking” setting will provide an audible chime and apply some brake pressure when a collision is detected. |
| ParkSense | This setting will change the type of ParkSense alert when a close object is detected and provide both an audible chime and a visual display. |
| Front ParkSense Volume | This setting adjusts the volume of the Front ParkSense system. The available settings are “Low”, “Medium”, and “High”. |
| Rear ParkSense Volume | This setting adjusts the volume of the Rear ParkSense system. The available settings are “Low”, “Medium”, and “High”. |
| Setting Name | Description |
|
Blind Spot Alert |
This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors. The “Lights & Chime” setting will activate both the lights on the outside mirrors and an audible chime. |
| Hill Start Assist | This setting will turn the Hill Start Assist system on or off. |
| ParkView Backup Camera Delay | This setting will add a timed delay to the ParkView Backup Camera when shifting out of REVERSE. |
| Active ParkView Backup Camera Guide Lines | This setting will turn the Active ParkView Backup Camera Guide Lines on or off. |
| Fixed ParkView Backup Camera Guide Lines | This setting will turn the Fixed ParkView Backup Camera Guide Lines on or off. |
| Forward Facing Camera Guidelines | This setting will turn the Forward Facing Camera Guidelines on or off. |
| Tire Fill Assist | This setting will turn the Tire Fill Assist on or off. |
Mirrors & Wipers
When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the option related to the vehicle’s mirrors and wipers.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Headlights With Wipers | This setting will turn the headlights on when the wipers are activated. |
Lights
When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.
NOTE
- When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchased.
- Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Headlight Off Delay |
This setting will allow you to set the amount of time it takes for the headlights to shut off after the vehicle is turned off. The available settings are “0 sec”, “30 sec”, “60 sec”, and “90 sec”. |
|
Headlight Illumination On Approach/Illuminated Approach |
This setting will allow you to set the amount of time it takes for the headlights to shut off after the vehicle is unlocked. The available settings are “0 sec”, “30 sec”, “60 sec”, and “90 sec”. |
| Headlights With Wipers | This setting will turn the headlights on when the wipers are activated. |
| Auto Dim High Beams/Automatic High Beam Headlamps | This setting will allow you to turn the Auto Dim High Beams on or off. |
| Daytime Running Lights | This setting will allow you to turn the Daytime Running Lights on or off. |
| Flash Lights With Lock | This setting will allow you to turn the flashing of the lights when the Lock button is pushed on the key fob on or off. |
| Interior Ambient Lights | This setting will allow you to turn the Interior Ambient Lights on or off. |
Doors & Locks
When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Auto Door Locks | This setting will allow you to change if the doors lock automatically when the vehicle reaches 12 mph (19 km/h). |
| Auto Unlock On Exit | This setting will unlock the doors when any of the doors are opened from the inside. |
| Flash Lights With Lock | This setting will allow you to turn the flashing of the lights when the Lock button is pushed on the key fob on or off. |
|
Sound Horn With Lock/Horn With Lock |
This setting will sound the horn when the Lock button is pushed on the key fob. The “Off” setting will not sound the horn when the Lock button is pushed. The “1st Press” setting will sound the horn when the Lock button is pushed once. The “2nd Press” setting will sound the horn when the Lock button is pushed twice. |
| Sound Horn With Remote Start/Horn With Remote Start | This setting will sound the horn when the remote start is activated from the key fob. |
|
Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks |
This setting will change how many pushes of the Unlock button on the key fob are needed to unlock all the doors. The “Driver Door” setting will only unlock the driver door on the first push on the Unlock button. The “All Doors” setting will unlock all doors with only one push of the Unlock button. |
| Passive Entry | This setting will allow you to turn the Passive Entry feature (Keyless Enter ‘n Go™) on or off. |
Seats & Comfort/Auto-On Comfort Systems
When Seats & Comfort/Auto-On Comfort Systems button is pressed on the touchscreen, the system displays the option related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Auto-On Heated Seat & Steering Wheel |
This setting will activate the vehicle’s comfort system and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started. |
AUX Switches
When the AUX Switches button is pressed on the touchscreen, the system displays the options related to the four vehicle AUX switches.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
AUX 1-4 |
This setting will adjust the type and power source for the four vehicle AUX switches. There are two types: “Latching” and “Momentary”. The power source for the AUX switches can either be set to run off the “Battery” or from the “Ignition”. In addition to setting the type and power source, you can set if the vehicle will recall the previous state at which the AUX switches were set. The Recalled Last State setting can be set to “On” or “Off”. Last state conditions are met only if the type is set to Latching and the power source is set to Ignition. |
Key-Off Options/Engine Off Options
After pressing the Key Off Options/Engine Off Options button on the touchscreen, the following settings will be available:
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Doors On Key Off Power Delay/Doors On Power Delay |
This setting will keep certain electrical features running after the engine is turned on. When any door is opened, the electronics will deactivate. The available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”. |
|
Doors Off Key Off Power Delay/Doors Off Power Delay |
This setting will keep certain electrical features running after the engine is turned off. When any door is opened, the electronics will deactivate. The available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”. |
|
Headlight Off Delay |
This setting will allow you to set the amount of time the headlights remain on after the vehicle has been turned off. The “+” will increase the amount of time. The “-” will decrease the amount of time. |
Audio
When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
|
Balance/Fade |
This setting will adjust audio levels from specific speakers in the front/back and left/right of the vehicle. The Speaker icon can be moved to set audio location. |
| Equalizer | This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the audio. |
| Setting Name | Description |
|
Speed Adjusted Volume |
This setting will adjust audio volume as speeds increase. At a higher setting, the volume will increase more as the vehicle speeds up. The available settings are “Off”, “1”, “2”, and “3”. |
| AUX Volume Offset | This setting will tune the audio levels from a device connected through the AUX port. The available settings are “+” and “-”. |
| Auto Play | This setting will automatically begin playing audio from a connected device. |
| Surround Sound | This setting will turn the Surround Sound system on or off. |
| Loudness | This setting will improve sound quality at lower volumes when enabled. |
Phone/Bluetooth®
When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Phone Pop-ups Displayed In Cluster | This setting will activate phone message pop-ups in the Instrument Cluster Display. |
|
Do Not Disturb |
This setting will open the “Do Not Disturb” settings menu. The settings are “Auto Reply” (both, text, call), “Auto Reply Message” (custom, default), and “Custom Auto Reply Message” (create message). |
| Paired Phones And Audio Devices | This setting will show the list of paired phones and audio devices. |
| Paired Phones | This setting will show the list of paired phones. |
| Setting Name | Description |
| Paired Audio Sources | This setting will show the list of paired audio sources. |
| Projection Manager | This setting will activate your smartphone to be projected on the vehicle’s touchscreen. |
SiriusXM® Setup
When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning.
NOTE
- A subscription to SiriusXM® satellite radio is required for these settings to be functional.
- Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Tune Start | This setting will play the current song from the beginning when you tune to a music channel using one of the 12 presets. |
| Channel Skip | This setting allows you to set channels that you wish to skip. A channel list will display of the skipped channels. |
| Subscription Info | This menu provides SiriusXM® subscription information. SiriusXM® Travel Link is a separate subscription. |
Reset/Restore Settings
When the Reset/Restore Settings button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Reset App Drawer To Default Order | This setting will reset the app drawer to its factory default layout. |
| Restore Apps | This setting will restore all installed apps. This feature is used if there is an issue using or installing apps. |
| Restore Settings to Default | This setting will return all the previously changed settings to their factory default. |
| Clear Personal Data | This setting will display a pop-up that gives you the option to clear all personal data from the system, including Bluetooth® devices and presets. |
System Information
When the System Information button is pressed on the touchscreen, the system displays the radio system information.
NOTE: Depending on the vehicle’s options, feature settings may vary.
| Setting Name | Description |
| Software Licenses | This setting will display the software licensing information screen. |
|
Map Update |
This setting will display different ways to update maps of the radio into your system. “Download System Information To USB” and “Generate Request Code” will appear as the two options to select from. |