2022 XC90 Volvo Rearview mirrors Owners Manual

Using controls for door mirrors

Folding in rearview mirrors electrically

1. The mirrors can be retracted for parking/driving in narrow spaces.
2. Depress the L and R buttons simultaneously.
3. Release them after approximately 1 second.
4. The mirrors automatically stop in the fully retracted position.
5. Fold out the mirrors by pressing down the L and R buttons simultaneously.
6. The mirrors automatically stop in the extended position with the previous setting.

Resetting to neutral

1. Mirrors that have been moved out of position by an external force must be reset electrically to their original position for electric retracting/extending to work correctly.
2. Fold in the door mirrors by pressing down the L and R buttons simultaneously.
3. Fold them out again by pressing the L and R buttons simultaneously.
4. Repeat the above procedure as necessary.
5. The mirrors are returned to their original position.

Angling during parking

• A door mirror can be angled down for the driver to view the side of the road when parking, for example.
• Engage the reverse gear and press the L or R button.
• Note that the button needs to be pressed twice. The button flashes when the door mirror is angled down.
• When the reverse gear is engaged, the door mirror automatically returns to its original position.

Automatic angling during parking

With this setting, the door mirror is automatically angled down when the reverse gear is selected. The folded position is preset and cannot be adjusted.
Tap on Settings in the center display’s top view.
Press My CarMirrors and Convenience.
Under Exterior Mirror Tilt at Reverse, select Off, Driver, Passenger, or Both to activate/deactivate and to select which review mirror should be angled.
You can make the door mirror return to its original position by pressing the L or R button twice.

Automatic retraction when locking

• In the center display, you can set all the rearview and door mirrors to retract/extend automatically when the car is locked/unlocked using the key.
• Tap on Settings in the center display’s top view.
• Press My CarMirrors and Convenience.
• Select Fold Mirror When Locked to activate/deactivate.

NoteIf you manually fold the mirrors with the L and R buttons and then lock the car, they will not fold out automatically when you unlock the car, even if this setting has been made. Extending must then be done manually using the L and R buttons.

Adjusting the rearview mirror dimming

Bright light from behind could be reflected in the rearview mirrors and dazzle the driver. Use dimming when disturbed by light from behind.

Manual dimming

The interior rearview mirror can be dimmed with a control on the mirror’s lower edge.

1. Control for manual dimming.
2. Use dimming by moving the control towards the passenger compartment.
3. Return to normal mode by moving the control towards the windscreen.
4. The control for manual dimming is not available on mirrors with automatic dimming.

Automatic dimming

If bright light comes from behind, the rearview mirrors automatically dim when it is dark outside or when the light is limited, for example when driving in tunnels.
Automatic dimming is always active while driving, apart from when the gearbox’s reverse position is selected.

Note

1. When sensitivity is changed there is no immediately noticeable change in dimming, but the change takes place gradually.
2. Dimming sensitivity will affect both the interior rearview mirror and the door mirrors.
3. To change dimming sensitivity:
4. Press Settings in the top view in the center display.
5. Press My CarMirrors and Convenience.
6. Under Rearview Mirror Auto Dimming, select Normal, Dark, or Light.
7. Dimming is adjusted automatically using light sensors in the interior rearview mirror.
8. For the door mirrors to be equipped with automatic dimming, the interior rearview mirror must also be equipped with automatic dimming.

NoteIf the sensors are obscured by e.g. parking permits, transponders, sun visors, or objects in the seats or in the cargo area in such a way that light is prevented from reaching the sensors, then the dimming function of the interior rearview and door mirrors is reduced.

Using a stored position for the seat, door mirrors, and head-up display

If the positions for the power seat, the door mirrors, and the head-up display have been stored, they can be activated by using the memory buttons.

Using a stored setting

A stored setting can be used with the front door either open or closed:

Open front door

Press one of the memory buttons 1 – 3 with a brief touch. The power seat, door mirrors, and head-up display move and then stop at the positions stored in the selected memory button.

Closed front door

Hold one of the memory buttons 1 – 3 depressed until the seat, door mirrors, and head-up display stop in the positions that are stored in the selected memory button.

If the memory button is released, the movement of the seat, door mirrors, and head-up display will be stopped.

Warning

• Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
• Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
• Do not adjust the seat while driving.
• Make sure there is nothing under the seats when they are being adjusted.

NoteAll driver profiles need to be set in Protect Profile mode in order for the stored positions to work.

Storing position for the seat, door mirrors, and head-up display

You can store the position for the power seat, door mirrors, and head-up display in the memory buttons.
Store three different positions for the power seat, the door mirrors, and the head-up display using the memory buttons.
The buttons are located on the inside of one of the front doors or both.

1. Memory button.
2. Memory button.
3. Memory button.
4. Button M for storing settings.

Storing a position

1. Adjust the seat, door mirrors, and head-up display to the desired position.
2. Press and hold the M button depressed. The light indicator in the button illuminates.
3. Within three seconds, press and hold the 1, 2, or 3 buttons.
4. When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.
5. If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.
6. The seat, the door mirrors, or the head-up display must be readjusted before a new memory can be set.

NoteAll driver profiles need to be set in Protect Profile mode in order for the stored positions to work.

Activating and deactivating the heated rear window and door mirrors

The heated rear window and door mirrors are used to quickly remove mist and ice from the windows and mirrors.

Activating and deactivating heated rear window and door mirrors from the center console

In the center console is a physical button for rapid access to the heated rear window and door mirrors.

1. Physical button in the center console.
2. Press the button.
3. Heated rear window and door mirrors are activated/deactivated and the button illuminates/extinguishes.

Activating and deactivating heated rear window and door mirrors from the center display

Open the climate view in the center display by pressing the symbol in the middle of the climate row.

Press Rear.
Heated rear window and door mirrors are activated/deactivated and the button illuminates/extinguishes.

Activating and deactivating automatic starting of the heated rear window and door mirrors

1. The heated rear window and door mirrors are used to quickly remove mist and ice from the windows and mirrors.
2. It is possible to set whether the automatic start of the heated rear window and door mirrors should be activated/deactivated when the engine is started.
3. With automatic start activated, heating will start when there is a risk of ice or misting on the windscreen/window.
4. The heating switches off automatically when the windscreen/window is sufficiently warm and the ice or misting is gone.
5. Press Settings in the top view in the center display.
6. Press Climate.
7. Select Auto Rear Defroster to activate/deactivate the automatic start of the heated rear window and door mirrors.