2022 XC90 Volvo Mounting points for child seats
Lower mounting points for child seats
The vehicle is equipped with lower mounting points for child seats in the front seat (Option/accessory.) and the second row of seats. The lower mounting points are designed to be used in conjunction with certain rear-facing child seats. Always follow the manufacturer’s installation instructions when connecting a child seat to the lower mounting points.
Mounting point locations in the front seat. The mounting points in the front seat are located on the sides of the passenger seat’s legroom. The mounting points in the front seat are only mounted if the vehicle is equipped with a switch to activate/deactivate the passenger airbag. (Option/accessory.)
Mounting point locations in the second row of seats. The mounting points in the second row of seats are located on the rear section of the front seat’s floor rails.
Never store loose objects around a child restrain system’s support leg. Make sure that loose parts of the child restrain system (e.g. fastening straps) are anchored as specified in the child restrain system’s mounting instructions.
i-Size/ISOFIX mounting points for child seats
The vehicle is equipped with i-Size/ISOFIX mounting points for child seats in the second row of seats. i-Size/ISOFIX (Names and symbols change depending on market.) is a fixture system for car child seats that is based on an international standard. Always follow the manufacturer’s installation instructions when connecting a child seat to the i-Size/ISOFIX mounting points.
Mounting point locations for the second row of seats are indicated by symbols (Names and symbols change depending on market.) on the upholstery of the backrest. The mounting points for i-Size/ISOFIX for the second row of seats are concealed behind the lower section of the second seat row’s backrest, in the outer seats. Press the seat cushion down to access the mounting points.
Upper mounting points for child seats
The car is equipped with upper mounting points for child seats on the outer second row seats. The upper mounting points are primarily intended for use with front-facing child seats. Always follow the manufacturer’s installation instructions when connecting a child seat to the upper mounting points.
Five and seven seat variant: Mounting point locations for the second row of seats are indicated by symbols on the rear of the backrest.
Six seat variant: Mounting point locations for the second row of seats are indicated by symbols on the rear of the backrest. The mounting points for the second row of seats are located on the rear of the outer seats in the second row seats.
The child seat’s upper straps must be routed through the hole in the head restraint leg before they are tensioned at the mounting point. If this is not possible, follow the recommendations from the child seat manufacturer.
Fold the head restraints in order to facilitate fitting this type of child seat in cars with folding head restraints on the outer seats, raise the head restraint after fitting. The head restraint must always be raised when the child restraint system is used.
In cars with a cargo cover over the luggage compartment, this must be removed before child seats can be attached to the securing points.