- use of polarising sunglasses
- a driving position which means that the driver is not sitting centered in the seat
- objects on the display unit’s cover glass
- unfavorable light conditions.
Examples of what can be shown in the display.- Speed
- Cruise control
- Navigation
- Road signs
City Safety in the head-up display
In the event of a collision warning, the information in the head-up display is replaced by the warning symbol for City Safety. This graphic is illuminated even if the head-up display is switched off.
Symbols in the head-up display
A number of symbols can be shown temporarily in the head-up display.
Symbol | Specification |
---|---|
| Warning symbol – read the warning message in the driver display. |
| Information symbol – read the message in the driver display. |
| The snowflake symbol illuminates the event of a risk of icy conditions. |
Activating and deactivating the head-up display
- The head-up display can be activated and deactivated when the car has been started.
- Activate/deactivate the function in the center display’s function view.
- Press the Head-up Display button.
- The head-up display is activated/deactivated.
Settings for head-up display
Settings can be defined when the car has been started and a projected image is shown on the windscreen.
Selecting display options
- Select which functions are to be shown in the head-up display.
- Tap on Settings in the center display’s top view.
- Press .
Select one or more functions:
- Show Navigation
- Show Road Sign Information
- Show Driver Support
- Show Phone
The setting is saved as a personal setting in the driver profile.
Adjusting brightness and vertical position
- Press the Head-up Display Adjustments button in the center display function view.
- Adjust the brightness and vertical position of the projected image in the driver’s field of vision using the steering wheel’s right-hand keypad.
- Reducing the brightness
- Increasing the brightness
- Raising the position
- Lowering the position
- Confirm
- The brightness of the graphics is automatically adapted to their background light conditions.
- The brightness is also affected by the adjustment of the brightness in the car’s other displays.
- The height position can be stored in the memory function for the power front seat using the keypad in the driver’s door.
Calibrate the horizontal position
- The head-up display’s horizontal position may need to be calibrated if the windscreen or display unit is replaced.
- Calibration means that the projected image is rotated clockwise or anticlockwise.
- Tap on Settings in the center display’s top view.
- Select .
- Calibrate the image’s horizontal position with the steering wheel’s right keypad.
- Rotate anticlockwise
- Rotate clockwise
- Confirm
Cleaning the Head-up display
- Gently wipe the display’s cover glass with a clean and dry microfibre cloth.
- If necessary, lightly moisten the microfibre cloth.
- Never use strong stain removers.
- A special cleaning agent available from Volvo dealers can be used for more difficult cleaning.
Using a stored position for the seat, door mirrors, and head-up display
Using a stored setting
A stored setting can be used with the front door either open or closed:
Open front door
Press one of the memory buttons 1 – 3 with a brief touch. The power seat, door mirrors, and head-up display move and then stop at the positions stored in the selected memory button.
Closed front door
Hold one of the memory buttons 1 – 3 depressed until the seat, door mirrors, and head-up display stop in the positions that are stored in the selected memory button.
If the memory button is released, the movement of the seat, door mirrors, and head-up display will be stopped.
- Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.
Storing position for seat, door mirrors, and head-up display
Store three different positions for the power seat, the door mirrors, and the head-up display using the memory buttons. The buttons are located on the inside of one of the front doors or both.
- Memory button.
- Memory button.
- Memory button.
- Button M for storing settings.
Storing a position
- Adjust the seat, door mirrors, and head-up display to the desired position.
- Press and hold the M button depressed. The light indicator in the button illuminates.
- Within three seconds, press and hold the 1, 2, or 3 buttons.
- When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.
- If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.
- The seat, the door mirrors, or the head-up display must be readjusted before a new memory can be set.
The navigation system on the windscreen.- The driver can receive guidance and information from the navigation system in the head-up display at the bottom of the windscreen.
- Whether or not the navigation system should be shown in the head-up display can be set, as well as the position of the information field.