2023 Volvo XC90 Recharge Plug-in Hybrid Specifications for engine
Engine specifications
Engine specifications (power, etc.) for each respective engine alternative can be found in the table below. The car is driven both by a petrol engine and an electric drive motor (ERAD – Electric Rear Axle Drive).
Note
Not all engines are available in all markets.
Not all engines are available in all markets.
Note
If engine data is missing in the table, it will be updated at a later date.
If engine data is missing in the table, it will be updated at a later date.
Engine | Engine code
The engine code, component number, and serial number can be found on the engine. |
Output
(kW/rpm) |
Output
(hp/rpm) |
Max. rated power
(kW/rpm) |
Max. rated power
(hp/rpm) |
Torque
(Nm/rpm) |
No. of cylinders |
---|---|---|---|---|---|---|---|
T8 AWD | B4204T56 | 228/6000 | 310/6000 | 253/6000 | 344/6000 | 400/3000–4800 | 4 |
T8 AWD | B4204T53 | 233/6000 | 317/6000 | – | – | 400/3000–5400 | 4 |
T8 AWD | B4204T57 | 233/6000 | 317/6000 | – | – | 400/3000–5400 | 4 |
Electric drive motor
Max. power output: 107 kW (145 hp).
Torque: 309 Nm.
Adverse driving conditions for engine oil
Adverse driving conditions can lead to abnormally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.
Check the oil level more frequently for long journeys:
Check the oil level more frequently for long journeys:
- towing a caravan or trailer
- in mountainous regions
- at high speeds
- in temperatures colder than -30 °C (-22 °F) or hotter than +40 °C (+104 °F).
The above also applies to shorter driving distances at low temperatures. Choose a fully synthetic engine oil for adverse driving conditions. It provides extra protection for the engine. Volvo recommends:
Important
In order to fulfill the requirements for the engine’s service intervals, all engines are filled with specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption, and environmental impact. Approved engine oil must be used in order that the recommended service intervals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise, there is a risk of the service life, starting characteristics, fuel consumption, and environmental impact of the car affected. If engine oil of the prescribed grade and viscosity is not used, engine-related components may become damaged. Volvo disclaims any liability for any such damage. Volvo recommends that oil changes are carried out at an authorized Volvo workshop.
In order to fulfill the requirements for the engine’s service intervals, all engines are filled with specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption, and environmental impact. Approved engine oil must be used in order that the recommended service intervals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise, there is a risk of the service life, starting characteristics, fuel consumption, and environmental impact of the car affected. If engine oil of the prescribed grade and viscosity is not used, engine-related components may become damaged. Volvo disclaims any liability for any such damage. Volvo recommends that oil changes are carried out at an authorized Volvo workshop.
Engine oil – specifications
Engine oil grade and volume for each respective engine alternative can be read in the table. Volvo recommends:
Engine | Engine code
The engine code, component number, and serial number can be found on the engine. |
Volume, incl. oil filter
(liters, approx.) |
Oil grade |
---|---|---|---|
T8 AWD | B4204T53 | 5,6 | Castrol Edge Professional V 0W-20 or VCC RBS0-2AE 0W-20 |
T8 AWD | B4204T56 | 5,6 | |
T8 AWD | B4204T57 | 5,6 |