The driver display shows this symbol when the system is engaged.Braking from the system may be heard as a pulsing sound, and the car may accelerate more slowly than expected when applying the throttle.
The system consists of the following subfunctions:
- Stability function
- Spin control and traction control system
- Engine Drag Control
- Trailer stability assist
Warning
- The function is supplementary driver support intended to facilitate driving and make it safer – it cannot handle all situations in all traffic, weather and road conditions.
- The driver is advised to read all sections in the Owner’s Manual that relate to this function to learn about factors such as its limitations and what the driver should be aware of before using the system.
- Driver support functions are not a substitute for the driver’s attention and judgement. The driver is always responsible for ensuring the car is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.
Stability function
The function checks the driving and brake force of the wheels individually in order to stabilise the car.
Spin control is activate at all speeds, and prevents the wheels from slipping against the road surface during acceleration.Traction control is active at low speeds, and can brake a slipping wheel to increase traction on the wheel on the opposite side.
Trailer stability assist (TSA) stabilises a car towing a trailer in situations where they begin snaking.
Symbols and messages for electronic stability control
Symbol | Message | Specification |
---|---|---|
| Constant glow for approx. 2 seconds | System check when the engine is started. |
| Flashing light | The system is being activated. |
– | Traction control temporarily off | The traction control system has been temporarily reduced due to excessive brake temperature. The function is reactivated automatically when the brakes have cooled. |
| ESC Service required | The system is disengaged. Stop the car at a safe place. Check whether the error was temporary or if it persists by switching off the engine and starting it again. If the problem persists, contact a workshop – an authorised Volvo workshop is recommended. The car can be driven but without the ESC functionality. |
- A text message can be cleared by briefly pressing the
button, located in the centre of the steering wheel’s right-hand keypad. - If a message remains, contact a workshop – an authorised Volvo workshop is recommended.