The location of the mounting points
Mounting point locations in the front seat.- The mounting points in the front seat are located on the sides of the passenger seat’s legroom.
- The mounting points in the front seat may only be mounted if the vehicle is equipped with a switch to activate/deactivate the passenger airbag.
Mounting point locations in the rear seat.- The mounting points in the rear seat are located on the rear section of the front seat’s floor rails.
Never store loose objects around a child’s restrain the system’s support leg. Make sure that loose parts of the child restrain system (e.g. fastening straps) are anchored as specified in the child restrain system’s mounting instructions.
i-Size/ISOFIX mounting points for child seats
- The car is equipped with i-Size/ISOFIX mounting points for child seats in the rear seat.
- i-Size/ISOFIX is a fixture system for car child seats that is based on an international standard.
- Always follow the manufacturer’s installation instructions when connecting a child seat to the i-Size/ISOFIX mounting points.
The location of the mounting points
Mounting point locations for the rear seat are indicated by symbols on the covers that conceal the mounting points.- The mounting points for i-Size/ISOFIX for the rear seat are located behind covers in the lower section of the rear seat’s backrest, in the outer seats.
- Lift the covers in order to access the mounting points. Locate the mounting points that may be positioned some way behind the covers.
Upper mounting points for child seats
- The car is equipped with upper mounting points for child seats on the rear seat’s outer seats.
- The upper mounting points are primarily intended for use with front-facing child seats.
- Always follow the manufacturer’s installation instructions when connecting a child seat to the upper mounting points.
The location of the mounting points
Mounting point locations for the rear seat are indicated by symbols on the rear of the backrest.- The mounting points for the rear seat are located on the rear of the rear seat’s outer seats.
Warning
The child seat’s upper straps must be routed through the hole in the head restraint leg before they are tensioned at the mounting point. If this is not possible, follow the recommendations from the child seat manufacturer.
Fold the head restraints in order to facilitate fitting this type of child seat in cars with folding head restraints on the outer seats, and raise the head restraint after fitting.
The head restraint must always be raised when the child restraint system is used.
In cars with a cargo cover over the luggage compartment, this must be removed before child seats can be attached to the securing points.