- Make sure that your phone supports tethering and that this function is activated.
- Connect your phone to the car via Bluetooth. Go to settings
- If the phone has been connected previously, tap on the icon for tethering via Bluetooth for the phone you want to use. Otherwise, first select Pair new device.
- Approve, via the message shown, that the connection should take place.
- The car is connected to the Internet.
The telephone and network provider must support tethering (internet connection sharing), and the subscription must include data.
Phone
A phone with Bluetooth can be connected wirelessly to the car. When a phone has been connected and linked to the car as a phone device, it can be used make calls, send/receive messages, and play back media wirelessly. The phone is operated from the centre display, but also partly via voice control.
Managing contacts
When a phone is connected to the car, contacts can be managed directly in the centre display. When a phone is connected to the car using Bluetooth and is selected as phone device, contacts are shown in the phone app under their own tab. Before the contacts are shown in the car, sharing of contacts must be accepted in the phone. Browse through your contacts by swiping up or down. It is possible to show the phone’s favourites in the car. (Some phones cannot synch favourites. In which case, it is possible to manually add favourites in the car.)
It may take a while before the contacts are loaded. If they are still not shown after a while, try disconnecting and reconnecting the phone.
Not all phones are fully compatible with the car. In such cases, contacts cannot be displayed in the car.
Managing phone calls
It is possible to make and receive calls when the phone is connected to the car via Bluetooth. The phone must be connected as phone device.
- Open the phone app from the home view or app view
- Choose a contact from Favourites, Recents or Contacts. Alternatively, enter a telephone number using the keypad.
- Tap on the contact to make a call.
- Tap on
You can also make calls using voice control.
- Tap on
- Tap on
If a new call comes in during a current call, the new call can be answered via the centre display. The original call is parked when the new call is answered. Switch between the calls by tapping on the symbols that represent them.
Tap on the microphone symbol to switch off the microphone. The person on the call will not hear what is being said in the car.
Tap on CarPhone to toggle the sound between the speakers in the car and the phone speaker.
If the keypad needs to be used during a current call, it can be opened by tapping on its symbol in the centre display. To exit the keypad view and return to call view, tap on the same symbol again.
Missed calls are shown in the home view where it is also possible to call back. Missed calls are also shown in the notification view at the top of the centre display.
Managing text messages
It is possible to receive and send text messages, in the form of SMS, when the phone is connected to the car. To be able to manage text messages in the car, the phone must be connected via Bluetooth (Text messages can only be managed in the car if the phone is compatible.) as phone device and the user must have approved in the phone’s Bluetooth settings that notifications should be shown.
You can dictate a new message by asking the voice control system to send a message to a named contact or a phone number.
When the phone is connected to the car, a notification is shown at the top of the centre display when a new text message is received. Choose whether to play back the message by tapping on the screen or using voice control. It is also possible to choose to mute the conversation. In which case, no more notifications for the conversation are shown while driving.
When a text message has been read out, it is possible to dictate a reply. (Only applies to phones with Android or iOS 13 or later.) Follow the instructions given by the voice control system.
If new text messages are shown on the phone but not in the centre display, try disconnecting and reconnecting the phone.
Wireless phone charger
(Option/accessory.)
There is a charging plate for wireless phone charging located in the tunnel console.
A condition for being able to charge the phone is that it supports wireless charging (Qi). Phones not equipped with wireless charging receivers can often be supplemented with a shell that makes wireless charging possible.
Wireless charging may affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
Using the wireless telephone charger
(Option/accessory.)
The rubber plate under the centre display makes it possible to charge phones without the need to use the phone’s cable.
Wireless phone charger in front of gear lever
Wireless charging may affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
To use the wireless charging plate:
- Remove all other objects from the charging plate and position the phone in the centre of the charging plate.
- Phone charging is started and the
- Phone charging is started and the
Avoid storing cards with Near Field Communication (NFC), such as debit cards for contactless payment, together with the phone. This type of card can be destroyed when charging is in progress.
Some phones may become hot during wireless charging. This is normal.
- Check that the charging plate is free from other objects.
- Check that the phone supports wireless charging (Qi).
- Remove the case from the phone if one is fitted.
- Lift the phone and position it in the centre of the charging plate once again.
- Check that the car is running.
- Check that your phone has not slid off the charging pad while driving.
- If battery temperature becomes too high during charging, the charging function is deactivated.
- If any of the doors are opened, charging is interrupted for several seconds.
If objects prevent charging on the charging plate, a message is shown in the centre display.
Keep the phone and charging plate free of other objects while charging to avoid overheating.
Certificate for wireless telephone charger
| USA/Canada | FCC ID : BEJWC510MVV20 IC : 2703H-WC510MVV20 This device complies with part 15 of the FCC rules and with RSS-Gen,RSS-216 rules of Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changed or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 15cm between the radiator and your body. – | |