The driver display shows this symbol when the system is engaged.
Braking from the system may be heard as a pulsing sound, and the car may accelerate more slowly than expected when applying the throttle.
- Stability function
- Spin control and traction control system
- Engine Drag Control
- Trailer stability assist
- The function is supplementary driver support intended to facilitate driving and make it safer – it cannot handle all situations in all traffic, weather, and road conditions.
- The driver is advised to read all sections in the Owner’s Manual that relate to this function to learn about factors such as its limitations and what the driver should be aware of before using the system.
- Driver support functions are not a substitute for the driver’s attention and judgment. The driver is always responsible for ensuring the car is driven in a safe manner, at the appropriate speed, at an appropriate distance from other vehicles, and in accordance with current traffic rules and regulations.
Stability function
The function checks the driving and brake force of the wheels individually in order to stabilize the car.
Spin control and traction control system
Spin control is activated at all speeds, and prevents the wheels from slipping against the road surface during acceleration.
Traction control is active at low speeds, and can brake a slipping wheel to increase traction on the wheel on the opposite side.
Electric motor braking control
Electric motor braking control (EDC) can prevent involuntary wheel lock-up, e.g. when electric motor braking on slippery road surfaces. Involuntary wheel locking while driving can, amongst other things, impair the driver’s ability to steer the car.
Trailer stability assist
Symbols and messages for electronic stability control
| Symbol | Message | Specification |
|---|---|---|
| | Constant glow for approx. 2 seconds | System check when the car is started. |
| | Flashing light | The system is being activated. |
| – | Traction control temporarily off | The traction control system has been temporarily reduced due to excessive brake temperature. The function is reactivated automatically when the brakes have cooled. |
| | ESC Service required | The system is disengaged. Stop the car at a safe place. Check whether the error was temporary or if it persists by getting out of the car, locking it, unlocking it, and getting back in. If the problem persists, contact a workshop – an authorized Volvo workshop is recommended. The car can be driven but without ESC functionality. |
A text message can be cleared by briefly pressing the button, located in the center of the steering wheel’s right-hand keypad.
If a message remains, contact a workshop – an authorized Volvo workshop is recommended.