Settings can be made within the following areas:
- Position Format
- Map Display Format
- Show Speed Cameras
- Show Favourites
- Point of Interest (POI)
Position Format is used to choose whether the current position should be named/shown with its address or its coordinates:
- Address
- Coordinates and altitude
Map Display Format is used to choose how the map’s colours should be shown:
- Day – bright colours.
- Night – dark colours so as not to interfere with night vision.
- Auto – the system switches between Day and Night depending on the light in the passenger compartment.
Choose whether or not Favourites shall be shown on the map.
The POIs to be shown on the map are indicated under Point of Interest (POI). Tap the desired category, e.g. “Transportation”, and then select to show all or specific sub categories. Exit the menu by pressing Back or Close.
(Option/accessory.)
- Map – manage map content and appearance.
- Route and Guidance – manage guidance and route display and calculation.
- Traffic – manage information about traffic disruptions.
- Arrival Time Format
- Voice Guidance Level
- Choose Default Route Type
- Route Learning
- Avoidance Settings
- Suggest Petrol Station
Select how arrival time should be specified:
- ETA (Estimated Time of Arrival) (estimated time of arrival at destination)
- RTA(Remaining Time to Arrival) (remaining time to arrival)
The times shown apply to the time zone of the destination.
Press Voice Guidance Level. Tap on the voice guidance required:
- None (no automatic voice guidance but the possibility of manually requesting current voice guidance once)
- Low (only one message per guidance point)
- Medium (up to 3 messages per guidance point, with limited information)
- Full (up to 4 messages per guidance point and all available information)
Select the standard type of route preferred:
- Fast
- Eco
- Scenic (motorways are avoided as far as possible, so the journey time may be long)
It is also possible to show an alternative route while driving continues.
Select Route Learning if data collection to optimise route calculation should be permitted.
Press Avoidance Settings to open a menu with different options that can be avoided automatically, if possible, when calculating route. For example, select tunnels, areas with congestion charge and ferries.
Press Suggest Petrol Station to activate or deactivate suggestions for nearby petrol stations in the driver display when the fuel level is low.
Traffic settings
- Show and Handle Traffic Events
- Avoid Traffic Events
- Show Free Flowing Traffic
- Real Time Traffic Information
Select whether traffic events should be shown on the map and used for route calculation:
- None
- Major
- All
Select whether traffic incidents should be avoided when calculating a route:
- Never
- Ask (any suggestions for route changes are given during the journey)
- Always
Select Show Free Flowing Traffic to show this on the map.
Select Real Time Traffic Information to use Real Time Traffic Information via the Internet (RTTI).