2023 Volvo XC40 Mild Hybrid Driver display
Driver display
The driver display shows information about the car and driving. The driver display contains gauges, driver support functions, and indicator and warning symbols, among other things. The content of the driver display depends on the car’s equipment, settings and which functions are active at that time.
The driver display is activated as soon as a door is opened. The driver display extinguishes after a while if it is not used. To reactivate it, proceed with one of the following:
- Activate ignition position I.
- Open one of the doors.
Warning
If the driver display should extinguish, not illuminate on activation/start or be fully or partially illegible, the car must not be used. You should visit a workshop immediately. Volvo recommends an authorized Volvo workshop. In the event of a fault in the driver display the information e.g. brakes, airbags, or other safety systems may not be shown.
If the driver display should extinguish, not illuminate on activation/start or be fully or partially illegible, the car must not be used. You should visit a workshop immediately. Volvo recommends an authorized Volvo workshop. In the event of a fault in the driver display the information e.g. brakes, airbags, or other safety systems may not be shown.
In which case, the driver cannot check the status of the car’s systems or receive current warnings and information.
| On the left | In the middle | On the right |
|---|---|---|
| Indicator and warning symbols | Indicator and warning symbols | Indicator and warning symbols |
| Speedometer | Temperature | Tachometer |
| Cruise control and speed limiter information | Messages, in some cases with graphics | Drive mode |
| Odometer | Door and seatbelt information | Driving direction selected |
| – | Driver support functions | Regenerative braking |
| – | App menu (activated via steering wheel keypad) | Fuel gauge |
| – | – | Trip meter |