V60

2023 Volvo V60 Memory Function for Front Seat Owners Manual

2023 Volvo V60 Memory function for front seat

Using a stored position for the seat, door mirrors, and head-up display

f the positions for the power seat, the door mirrors, and the head-up display have been stored, they can be activated by using the memory buttons.

Using a stored setting

A stored setting can be used with the front door either open or closed:

Open front door

Depress one of the memory buttons 1 (2) or 2 (3) with a short press. Power seat, door mirrors, and head-up display move and then stop at the positions stored in the selected memory button.

Closed front door

Hold one of the memory buttons 1 (2) or 2 (3) depressed until the seat, door mirrors, and head-up display stop in the positions that are stored in the selected memory button.
If the memory button is released, the movement of the seat, door mirrors, and head-up display will be stopped.

Warning

  • Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • Make sure there is nothing under the seats when they are being adjusted.

Note

The stored positions are saved in the active profile.

Storing position for a seat, door mirrors, and head-up display

You can store the position for the power seat, door mirrors, and head-up display in the memory buttons.
Store two different positions for the power seat, the door mirrors, and the head-up display using the memory buttons. The buttons are located on the inside of one of the front doors or both.
  1. Button M for storing settings.
  2. Memory button.
  3. Memory button.

Storing a position

  1. Adjust the seat, door mirrors, and head-up display to the desired position.
  2. Press and hold the M button depressed. The light indicator in the button illuminates.
  3. Within three seconds, press and hold the 1 or 2 buttons.
  4. When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.
  5. If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.
  6. The seat, the door mirrors, or the head-up display must be readjusted before a new memory can be set.

Note

The stored positions are saved in the active profile.

Automotive Solutions

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

7 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

7 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago