Pressing on the information card shows a small card, two presses show a larger card with more information. The information card’s content and options vary depending on the type of icon.
With, for example a marked point of interest (POI), the driver can select:
- Start navigation – the position is saved as a destination
- Add as waypoint – the position is saved as an intermediate destination (only displayed at the specified destination)
- Save – the position is saved in the library
- Remove from itinerary – the position is removed if it is included in the itinerary
- Nearby POI – points of interest when the car’s position appears
Showing POIs along a route
A list of points of interest (POI) along the route can be presented in the navigation system.
Press Ahead.- Press POI.
- POIs along the route are shown based on distance.
- When several POIs are in the same location they are shown as a group. Tap on the group to list POIs.
- Select a POI.
- Select one of the information cards alternatives and follow the instructions.
Itinerary
The itinerary is the route suggested in the navigation system when the user has entered a destination.
The first defined position will be the itinerary’s destination.
The subsequent positions will be the itinerary’s intermediate destinations.
An itinerary, its destination and intermediate destinations can easily be edited afterwards.
Show an alternative route
It is possible to search for alternative routes in the navigation system while guidance is in progress.
- Expand the tools field with the down arrow first and then with the three points.
Tap on the symbol for Itinerary to open the itinerary. - Press Alternative routes.
- Select an alternative route:
- Eco
- Fast
- Scenic
- Tap on the map.
- The updated route is then shown on the map and guidance resumes.
Edit or delete the itinerary
It is possible to remove intermediate destinations or the entire itinerary in the navigation system while guidance is in progress.
- Expand the tools field with the down arrow first and then with the three points.
Tap on the symbol for Itinerary to open the itinerary. - Tap on the recycle bin to delete an intermediate destination in the itinerary, or tap on Clear itinerary to delete the whole itinerary.
Show itinerary
It is possible to show the itinerary in the navigation system during road navigation.
- During guidance, expand the tools field with the down arrow and then the three points.
- Tap on the symbol for Itinerary to open the itinerary.
Showing guidance points in the itinerary
A list of the itinerary’s future guidance points helps the driver to plan upcoming manoeuvres in good time.
Show a list of turns ahead in the itinerary in the navigation system by:
- Expanding the tools field using the down arrow on the left-hand side.
- Expanding the tools field further with the three points.
- Tap on the symbol for Turn-by-Turn (see illustration).
A list of the itinerary’s guidance points is shown instead of the tools field (the list can be scrolled through). Pressing the arrow pointing left minimises the list.
The next guidance point is always placed at the top of the list.
The position is shown on the map by pressing one of the list’s guidance points. A subsequent tap on the crosshairs symbol (see illustration) resets the map to the guidance view, where the map follows the car.
(Option/accessory)
If the driver wants to avoid the nearest segment of a route, e.g. because the road is closed, a detour can be selected.
- Expand the tools field on the left-hand side with the down arrow and then with the three points.
- Press the symbol for Detour to show an alternative route with information about its longest/shortest route as well as calculated journey time. Normally only a short detour is proposed which quickly rejoins the original itinerary.
- If the suggestion is accepted: Tap on the sign with detour information. The route is accepted even if you are driving on the road suggested. After the proposal is accepted, guidance is resumed – now with the detour selected as the route. If the suggestion is not accepted continue to drive on the original route.
An alternative to the Detour function is to diverge from the itinerary’s route – the system then updates the route automatically and continues guidance to the destination along the most suitable route.
It is also possible to show an alternative route while driving continues.