V60

2022 Volvo V60 Climate controls for front seat Owners Manual

2022 Volvo V60 Climate controls for front seat

Activating and deactivating heated front seat

The seats can be heated in order to increase comfort for driver and passengers when it is cold.

  1. Press the left or right-hand side’s steering wheel and seat button in the climate row in the centre display in order to open the controls for seat and steering wheel.
    If the car is not equipped with ventilated seats or heated steering wheel (for the driver’s side), the button for heated seats is immediately available in the climate row.
  2. Repeatedly press the button for heated seats in order to change between the four levels: Off, High, Medium and Low.
    • The level changes and the button shows the set level.

Warning
Heated seats must not be used by people who find it difficult to perceive an increase in temperature due to a lack of sensation or who otherwise have problems operating the controls for the heated seats.

Activating and deactivating automatic start of heated front seat

The seats can be heated in order to increase comfort for driver and passengers when it is cold.

It is possible to set whether automatic start of heated seats should be activated/deactivated when the engine is started. With automatic start activated, heating will start in the event of low ambient temperature.

  1. Press Settings in the top view in the centre display.
  2. Press Climate.
  3. Select Auto Driver Seat Heating Level and Auto Passenger Seat Heating Level to activate/deactivate automatic start of heated driver’s and passenger seat.
  4. An “A” is shown at each button for heated front seats in the climate row when automatic starting has been activated.
  5. Select Low, Medium or High to select level after the function has been activated.

Regulating fan level for front seat

The fan can be set to several different automatically controlled fan speeds for the front seat.

  1. Open climate view in the centre display by pressing the symbol in the middle of the climate row.
  2. Fan control buttons in the climate view.
  3. Tap on the desired fan level, Off, 15 or Max.

Fan level is changed and the buttons for the selected level illuminate.

Important
If the fan is fully switched off then the air conditioning is not engaged, which results in a risk of misting on the insides of the windows.

Note
The climate control system automatically adjusts the air flow within the selected fan level based on requirements. This means that the fan speed may change even though the fan level is the same.

High fan level in the rear seat may cause increased sound volume in the front seat.

Regulating temperature for front seat

The temperature can be set to the desired number of degrees for the front seat’s climate zones.

Temperature buttons in the climate row.

  • Press the left or right-hand side temperature button in the centre display’s climate row to open the controls.

Temperature control.

Regulate the temperature by either of the following:

  • drag the control to the desired temperature, or
  • press +/ to raise/lower the temperature gradually.

The temperature changes and the button shows the set temperature.

Note
Heating or cooling cannot be hastened by selecting a higher or lower temperature than the actual desired temperature.

Synchronising temperature

The temperature in the car’s different climate zones can be synchronised with the temperature set on the driver’s side.

Synchronisation button on the driver’s side temperature controls.

  1. Press the driver’s side temperature button in the centre display’s climate row in order to open the controls.
  2. Press Synchronise temperature.

The temperature for all zones in the car is synchronised with the temperature set for the driver’s side and the synchronisation symbol is shown adjacent to the temperature button.

The synchronisation is stopped by means of a further press on Synchronise temperature or by means of changing the temperature settings for a climate zone other than the driver’s.

Activating and deactivating ventilated front seat

The seats can be ventilated to provide increased comfort in a hot climate, for example.

The ventilation system consists of fans in the seats and backrests that draw air through the seat upholstery. The cooling effect increases the cooler the passenger compartment air becomes. The system can be activated when the engine is running.

  1. Press the left or right-hand side’s steering wheel and seat button in the climate row in the centre display in order to open the controls for seat and steering wheel.
    If the car is not equipped with heated seats or heated steering wheel (for the driver’s side), the button for ventilated seats is immediately available in the climate row.
  2. Repeatedly press the button for ventilated seats in order to change between the four levels: Off, High, Medium and Low.
    • The level changes and the button shows the set level.
Automotive Solutions

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

5 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

5 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago