Note
- Not all engines are available in all markets.
- If engine data is missing in the table, it will be updated at a later date.
| Engine | Engine code | Output (kW/rpm) | Output (hp/rpm) | Torque (Nm/rpm) | No. of cylinders |
|---|---|---|---|---|---|
| T8 AWD | B4204T56 | 228/6000 | 310/6000 | 400/3000–4800 | 4 |
| T8 AWD | B4204T53 | 233/6000 | 317/6000 | 400/3000–5400 | 4 |
| T8 AWD | B4204T57 | 233/6000 | 317/6000 | 400/3000–5400 |
Adverse driving conditions for engine oil
Adverse driving conditions can lead to abnormally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.
Check the oil level more frequently for long journeys:
Check the oil level more frequently for long journeys:
- towing a caravan or trailer
- in mountainous regions
- at high speeds
- in temperatures colder than -30 °C (-22 °F) or hotter than +40 °C (+104 °F).
The above also apply to shorter driving distances at low temperatures.Choose a fully synthetic engine oil for adverse driving conditions. It provides extra protection for the engine.
Volvo recommends
Important
In order to fulfil the requirements for the engine’s service intervals all engines are filled with a specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption and environmental impact.An approved engine oil must be used in order that the recommended service intervals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise there is a risk of the service life, starting characteristics, fuel consumption and environmental impact of the car being affected.If engine oil of the prescribed grade and viscosity is not used, engine related components may become damaged. Volvo disclaims any liability for any such damage.Volvo recommends that oil changes are carried out at an authorised Volvo workshop.
In order to fulfil the requirements for the engine’s service intervals all engines are filled with a specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption and environmental impact.An approved engine oil must be used in order that the recommended service intervals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise there is a risk of the service life, starting characteristics, fuel consumption and environmental impact of the car being affected.If engine oil of the prescribed grade and viscosity is not used, engine related components may become damaged. Volvo disclaims any liability for any such damage.Volvo recommends that oil changes are carried out at an authorised Volvo workshop.
Engine oil – specifications
Engine oil grade and volume for each respective engine alternative can be read in the table.
Volvo recommends
| Engine | Engine code | Volume, incl. oil filter (litres, approx.) | Oil grade |
|---|---|---|---|
| T8 AWD | B4204T53 | 5,6 | Castrol Edge Professional V 0W-20 or VCC RBS0-2AE 0W-20 |
| T8 AWD | B4204T56 | 5,6 | |
| T8 AWD | B4204T57 | 5,6 |