S90

2023 Volvo S90/ S90 Recharge Plug-in Hybrid Lighting Owners Manuals

Contents hide

1 2023 Volvo S90/ S90 Recharge Plug-in Hybrid Lighting

2 Adjusting light functions via the centre display

3 Lighting control

3.1 Exterior lighting

3.2 Exterior and interior lighting

2023 Volvo S90/ S90 Recharge Plug-in Hybrid Lighting

Adjusting light functions via the centre display

Light functions can be adjusted and activated via the centre display.

Press in the centre display.
Then tap on Controls.
Adjust the required function for interior or exterior lighting.

Lighting control

The different lighting controls are used to control both exterior and interior lighting. The left-hand stalk switch activates and adjusts the exterior lighting. You can both activate and adjust the exterior and interior lighting via the centre display.

Exterior lighting

Rotating ring in the left-hand stalk switch.

When the car’s electrical system is in ignition position II, the following functions are available for the rotating ring’s different positions:

Position	Specification
	Daytime running lights. Main beam flash can be used.
	Daytime running lights and position lamps. Position lamps when the car is parked.(If the car is stationary but running, the rotating ring can be moved to position from another position to switch on only the position lamps instead of other lighting.) Main beam flash can be used.
	Dipped beam and position lamps. Main beam can be activated. Main beam flash can be used.
	Front daytime running lights and rear position lamps in daylight. Dipped beam and position lamps (Option/accessory.)in weak daylight or darkness, or when the front fog lamp and/or rear fog lamp are activated. The Active main beam function can be activated. Main beam can be activated when dipped beam is switched on. Main beam flash can be used.
	Active main beam on/off.

Volvo recommends that AUTO mode is used when the vehicle is driven.

Warning
The car’s lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations.
The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.