The symbol is shown on the windows where the glass is laminated.
Pinch protection for windows and sun blinds
- All power windows and sun blinds have pinch protection which is deployed if they are blocked by any object while opening or closing.
- In the event of blocking, the movement stops and then reverses automatically to approx. 50 mm (approx. 2 inches) from the blocked position (or to the full ventilation position).
- It is possible to force pinch protection when closing has been canceled, e.g. when ice is formed, by continuing to press the control in one and the same direction.
- If any fault arises with the pinch protection, a reset sequence can be tested.
If the starter battery is disconnected, the automatic opening and closing function must be reset to work properly. A reset must take place for pinch protection to work.
Reset sequence for pinch protection
Electrically-operated sun blinds have a reset sequence that can be tested if necessary.
Warning
- If the starter battery is disconnected, the automatic opening and closing function must be reset to work properly.
- A reset must take place for pinch protection to work.
- In the event of problems with the sunroof, contact a workshop.
Reset the power window
- Start with the window in the closed position.
- Then operate the controls in the manual position 3 times upwards to the closed position.
- The system is initialized automatically.
- If problems persist, contact a workshop.
Reset sunblind
- Start with the sun blind retracted.
- Press the control against retracting mode for approx. 15 seconds.
- The system is initialized automatically.
Activating and deactivating max defroster
Max defroster deactivates auto-regulation of the climate and air recirculation, activates air conditioning, and changes the fan level to 5 and the temperature to HI.
Note
Changing the fan level to 5 increases the noise level.
When the max defroster is deactivated, the climate control system returns to the previous settings.
Activating and deactivating the max defroster from the center console
There is a physical button in the center console for quick access to the max defroster.
For cars with a heated windscreen, the first press of the button activates the heating, and the next press activates the max defroster. A third press deactivates both.
- Cars without heated windscreen:
- Press the button.
- Max defroster is activated/deactivated and the button lights up/goes off.
- The temperatures in the various climate zones are not synchronized while the max defroster is activated.
Cars with heated windscreens:
Press the button repeatedly in order to switch between the three levels:
- Activated heated windscreen
- Activated heated windscreen and max defroster
- Deactivated.
The heated windscreen and max defroster are activated/deactivated and the button illuminates/extinguishes.
Note
Max defroster starts with a certain delay in order to avoid a short increase in fan level if the heated windscreen is deactivated by two quick presses of the button.
Activating and deactivating the max defroster from the center display
Open the climate view in the center display by tapping on the temperature button at the bottom center of the center display.
- Tap on the max defroster button.
- Max defroster is activated/deactivated and the button lights up/goes off.
- The temperatures in the various climate zones are not synchronized while the max defroster is activated.