Using a stored setting
A stored setting can be used with the front door either open or closed:
Open front door
Depress one of the memory buttons 1 or 2 with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.
Closed front door
Hold one of the memory buttons 1 or 2 depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button. If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.
- Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.
Storing position for seat, door mirrors and head-up display (Option/accessory)
You can store the position for power (Option/accessory) seat, door mirrors and head-up display (Option/accessory) in the memory buttons.
Store two different positions for the power (Option/accessory) seat, the door mirrors and the head-up display (Option/accessory) using the memory buttons. The buttons are located on the inside of one of the front doors or both (Option/accessory).
- Button M for storing settings.
- Memory button.
- Memory button.
Storing a position
- Adjust seat, door mirrors and head-up display to the desired position.
- Press and hold the M button depressed. The light indicator in the button illuminates.
- Within three seconds, press and hold the 1 or 2 button.
>When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.
If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place. The seat, the door mirrors or the head-up-display must be readjusted before a new memory can be set.