Exterior lighting
- Rotating ring in the left-hand stalk switch.
- When the car’s electrical system is in ignition position II, the following functions are available for the rotating ring’s different positions:
| Position | Specification |
|---|---|
| Daytime running lights. Main beam flash can be used. | |
| Daytime running lights and position lamps. Position lamps when the car is parked. Main beam flash can be used. | |
| Dipped beam and position lamps. Main beam can be activated. Main beam flash can be used. | |
| Front daytime running lights and rear position lamps in daylight. Dipped beam and position lamps in weak daylight or darkness, or when the front fog lamp and/or rear fog lamp are activated. The Active main beam function can be activated. Main beam can be activated when dipped beam is switched on. Main beam flash can be used. | |
| Active main beam on/off. |
Volvo recommends that mode is used when the vehicle is driven.
Warning
- The car’s lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations.
- The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.
Exterior and interior lighting
You can adjust the exterior and interior lighting in the centre display.