2023 Volvo S60 Lighting
Adjusting light functions via the centre display
Light functions can be adjusted and activated via the centre display.
- Press in the centre display.
- Then tap on Controls.
- Adjust the required function for interior or exterior lighting.
Lighting control
The different lighting controls are used to control both exterior and interior lighting. The left-hand stalk switch activates and adjusts the exterior lighting. You can both activate and adjust the exterior and interior lighting via the centre display.
Exterior lighting
- Rotating ring in the left-hand stalk switch.
- When the car’s electrical system is in ignition position II, the following functions are available for the rotating ring’s different positions:
Position | Specification |
---|---|
Daytime running lights. Main beam flash can be used. |
|
Daytime running lights and position lamps.
Position lamps when the car is parked. Main beam flash can be used. |
|
Dipped beam and position lamps.
Main beam can be activated. Main beam flash can be used. |
|
Front daytime running lights and rear position lamps in daylight.
Dipped beam and position lamps in weak daylight or darkness, or when the front fog lamp and/or rear fog lamp are activated. The Active main beam function can be activated. Main beam can be activated when dipped beam is switched on. Main beam flash can be used. |
|
Active main beam on/off. |
Volvo recommends that mode is used when the vehicle is driven.
Warning
- The car’s lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations.
- The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.
Exterior and interior lighting
You can adjust the exterior and interior lighting in the centre display.