Adjust the head restraint for the centre seat
The centre seat’s head restraint must be adjusted according to the passenger’s height so that, if possible, the whole of the back of the head is covered. Slide it up manually as required.
To lower the head restraint, the button (see illustration) must be depressed while the restraint is carefully moved down.
Warning
The centre seat head restraint must be in its lowest position when the centre seat is not used. When the centre seat is used, the head restraint must be correctly adjusted to the height of the passenger so that it covers the whole of the back of the head if possible.
Fold down the rear seat’s outer head restraints via the centre display
The outer head restraints can be retracted via the centre display’s function view. You can lower the head restraints in ignition position 0.
Press the Headrest Fold button to activate/deactivate lowering.
Move the head restraint back manually until a click is heard.
Warning
Do not lower the outer head restraints if there are passengers in any of the outer rear seats.
Warning
The head restraint must be in locked position after being folded up.
Lowering the backrests in the rear seat
(Option/accessory)
The rear seat’s backrest is divided into two parts. The two parts can be folded forward individually.
Warning
- Adjust the seat and fix it before driving away. Take care when adjusting the seat. Uncontrolled or careless adjustment can lead to trapping injuries.
- When loading long objects, they must always be strapped in securely to avoid injury and damage during sudden braking.
- Always switch off the car and apply the parking brake when loading and unloading the car.
- For cars with automatic gearbox, set the gear selector in P to prevent it from being moved by mistake.
Important
There must be no objects on the rear seat when the backrest is to be folded down. The seat belts must not be connected either. Otherwise there is a risk of damaging the rear seat upholstery.
Important
The armrest for the centre seat must be raised before lowering the seat.
The through-load hatch in the rear seat must be closed before lowering.
Note
When private locking is activated, the rear seat must be in upright position for locking to work. With the rear seat in lowered position, locking will not work.
Note
The front seats may need to be pushed forwards, and the backrests adjusted upwards, in order that the rear backrests can be fully folded forward.
Lowering the backrest
To facilitate folding of the rear seat, the car must be stationary and at least one rear door open.
Ensure that there are no occupants or objects in the rear seat.
Lower the centre seat’s head restraint manually.
Press and hold one of the buttons located in the parcel shelf on the left-hand side of the car.
The seat is released from the lock but remains in the same position. The head restraints are lowered automatically.
Lower the backrest manually to the horizontal position.
Raising the backrest
Raising the backrest to upright position is carried out manually:
Move the backrest up/back.
Press the backrest until the lock engages.
Raise the head restraints manually.
If necessary, raise the centre seat’s head restraint.
Warning
Check that the backrests and head restraints in the rear seat are locked properly after being folded up.
The head restraints of the outer seats must always be raised when there are passengers on any of the rear seats.
Through-load hatch in the rear seat
(Option/accessory)
The hatch in the rear seat’s backrest can be opened to transport long narrow items, e.g. skis.
In the cargo area, grip the hatch’s handle and fold down the hatch.
Fold forward the armrest in the rear seat.
If the private locking function is used then the through-load hatch must be closed.