2022 Volvo S60 Lighting
Adjusting light functions via the centre display
Several light functions can be adjusted and activated via the centre display. This applies to home safety light and guidance light, for example.
- Tap on Settings in the centre display’s top view.
- Press .
- Select Exterior Lights or Interior Lighting and then select the function that needs to be adjusted.
Lighting control
Exterior lighting
Rotating ring in the left-hand stalk switch. When the car’s electrical system is in ignition position II, the following functions are available for the rotating ring’s different positions:
Position | Specification |
---|---|
Daytime running lights. Main beam flash can be used. |
|
Daytime running lights and position lamps.
Position lamps when the car is parked. (If the car is stationary but running, the rotating ring can be moved to position from another position to switch on only the position lamps instead of other lighting.) Main beam flash can be used. |
|
Dipped beam and position lamps.
Main beam can be activated. Main beam flash can be used. |
|
Daytime running lights and position lamps in daylight.
Dipped beam and position lamps in weak daylight or darkness, or when the front fog lamp (Option/accessory.) and/or rear fog lamp are activated. The Active main beam function can be activated. Main beam can be activated when dipped beam is switched on. Main beam flash can be used. |
|
Active main beam on/off. |
Volvo recommends that mode is used when the vehicle is driven.
Warning
The car’s lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations. The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.
Thumbwheel in instrument panel
Thumbwheel (to left) for adjusting interior brightness.