Contents
hide
2023 Volvo S60 Recharge Plug-in Hybrid Cargo area
Cargo area
Inside the car’s cargo area, it is possible to secure the load so that it stays in place while driving.
Cargo area with mesh pocket(Option/accessory) or side panel. With folding(Option/accessory) backrests in the rear seat, the cargo area can be made more spacious. There are load retaining eyelets and bag holders available for holding the load securely in place. If the car is equipped with a spare wheel then this is attached on the cargo area floor. The car’s towing eye and puncture repair kit are stored under the cargo area floor.
Bag hooks
Bag hooks keep carrier bags in place and prevent them from overturning and spreading their contents across the cargo area.
Along the sides
There is a bag hook in the side panel on each side of the cargo area.There are two bag hooks in the side panel on each side of the cargo area.
ImportantThe bag hooks may be loaded with a maximum of 5 kg (11 lbs).
Under the parcel shelf
(Option/accessory)
Lower the hook from beneath the parcel shelf. Hang sufficiently deep bags with handles from the hooks.
Lower the hook from beneath the parcel shelf. Hang sufficiently deep bags with handles from the hooks.First aid kit
(Option/accessory)
The first aid kit contains first-aid equipment. Store the first aid kit in an appropriate place in the cargo area, e.g. in the space on the right-hand side. The first aid kit has Velcro straps and can be attached directly to the panel.
Load retaining eyelets
Use the load retaining eyelets to attach straps in order to anchor items in the cargo area.
WarningHard, sharp, and heavy objects that are loose or protrude may cause injury during heavy braking. Always secure large and heavy objects with a seatbelt or cargo retaining straps.
Warning triangle
Use the warning triangle to warn other road users if the car is stationary in traffic. Also activate the hazard warning flashers.
Storage spaces
The warning triangle is fitted with two clips on the inside of the boot lid.
The warning triangle is fitted with two clips on the inside of the boot lid.
Folding up the warning triangle
- Remove the warning triangle’s case by opening both latches.
- Remove the warning triangle from the case, unfold it and put the ends together.
- Fold out the warning triangle’s support legs.
Follow the regulations for the use of a warning triangle. Position the warning triangle in a suitable place with regard to traffic. Replace the warning triangle with case on the inside of the boot lid after use.
There is a button on the key to unlock the boot lid only.
Press the key’s 
button.
- The boot lid is unlocked but remains closed.
- The side doors are still locked and the alarm is armed.(Option/accessory) The lock and alarm indicator on the instrument panel extinguishes in order to show that the entire car is not locked.
- You can open the boot lid by gripping the rubberised pressure plate underneath its lower edge.
- If the boot lid is not opened within 2 minutes then it is relocked and the alarm is re-armed.
Operating the boot lid with foot movement
(Option/accessory)
The boot lid can be opened using a foot movement(Option/accessory) under the rear bumper. The function makes things easier when your hands are full.
The sensor is located in the centre of the bumper. One of the car’s keys must be within range behind the car, approx. 1 metre (3 feet), for activation. This also applies if the car is unlocked.
Opening the boot lid with foot movement
Kicking motion within the detector’s activation area. Make one forward kicking motion in the sensor area under the rear bumper. Then take a step back. The bumper must not be touched.
- A short acoustic signal sounds when the boot lid is opened.
If several kicking motions are made without a key within range, the function is deactivated after a while. Do not leave your foot positioned under the car during the kicking motion. The activation may then fail. The boot lid is closed by pressing it down manually.
Note
Make sure you keep the area around the foot movement detector clean. A build-up of dirt, ice or snow may disrupt its function.
Make sure you keep the area around the foot movement detector clean. A build-up of dirt, ice or snow may disrupt its function.
Note
Pay attention to the possibility that the system may be activated in a car wash if the key is within range.
Pay attention to the possibility that the system may be activated in a car wash if the key is within range.
Unlocking the boot lid from the inside of the car
The boot lid can be unlocked from inside the car using a button beside the steering wheel on the instrument panel.
- Press the
button on the instrument panel. The boot lid is unlocked and can be opened from the outside.
Keyless unlocking of boot lid
(Option/accessory)
With keyless locking and unlocking, it is sufficient to press lightly on the rubberized pressure plate on the boot lid handle to unlock.
NoteOne of the car’s keys must be within range behind the car for unlocking to work. The boot lid is held closed by an electrical lock.
To open:
- Press gently on the rubberised pressure plate beneath the boot lid handle.
- The lock is released.
- Lift by the outside handle in order to open the boot lid.
Important
- Handle the rubber panel with care to avoid damage to its electrical contact. Minimal force is required for activation.
- Do not exert the lifting force on the rubber panel when opening – lift the handle.
It is also possible to open the boot lid with a kicking motion under the rear bumper.
WarningDo not drive with an open boot lid! Toxic exhaust fumes could be drawn into the car through the cargo area.
Fuses in cargo area
The fuse box with the cargo area fuses is located behind a panel on the right side.
- The central electrical unit is located behind the panel on the right-hand side.
- Special pliers are housed on the inside of the cover to facilitate replacement of tripped fuses.
- The fuse box in the engine compartment provides space for several spare fuses.
PositionsThe positions of the fuses are shown on the inside of the cover. Functions and components in the fuse table cover several models and engine alternatives. A fuse description can therefore apply to fewer than those in the table, or be completely missing, depending on how the car is equipped. If a position has multiple table values, it is due to variations in equipment level. In which case, follow the value of the fuse being replaced. In the event of doubt – contact a workshop. An authorised Volvo workshop is recommended.
| Function | Ampere | Type | |
|---|---|---|---|
| Rear window defroster | 30 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Central electronic module | 40 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| – | – | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Lock motor backrest, right rear | 15 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| – | – | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Lock motor backrest, left rear | 15 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended0 | |
| Door module, right rear | 20 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Control module for reduction of nitrous oxides (diesel) | 30 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| – | – | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Door module, right front | 20 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Towbar control module( Option/accessory) | 40 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Seatbelt pretensioner, right | 40 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Internal relay coils | 5 | Micro | |
| Control module for reduction of nitrous oxides (diesel) | 15 | Micro | |
| Door module, left rear | 20 | Micro | |
| Alcohol lock( Option/accessory) | 5 | Micro | |
| – | – | Micro | |
| Towbar control module( Option/accessory) | 25 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Accessory module | 40 | ||
| Door module, left front | 20 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Seatbelt pretensioner, left | 40 | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) | |
| Parking camera( Option/accessory) | 5 | Micro | |
| – | – | Micro | |
| – | – | Micro | |
| Position prepared for special vehicle | 5 | Micro | |
| Supply when the ignition is switched on | 10 | Micro | |
| – | – | Micro | |
| – | – | Micro | |
| Seat heating, left rear | 15 | Micro | |
| – | – | Micro | |
| Blind Spot Information (BLIS)( Option/accessory) | 5 | Micro | |
| – | – | Micro | |
| Seatbelt pretensioner, right | 5 | Micro | |
| Actuator, exhaust system (petrol) | 5 | Micro | |
| – | – | Micro | |
| Control module All Wheel Drive (AWD)( Option/accessory) | 15 | Micro | |
| Seat heating, right rear( Option/accessory) | 15 | Micro | |
| – | – | MCase(This type of fuse should be replaced by a workshop. An authorised Volvo workshop is recommended) |