Interior rearview mirror
The interior rearview mirror is equipped with HomeLink (Option/accessory) and automatic dimming.(Option/accessory) The interior rearview mirror is adjusted by angling it manually.
Door mirrors
Angling adjustment of the door mirrors
To ensure better visibility to the rear, the door mirrors need to be set to the preferences of the driver. There are a number of automatic settings that can also be linked to the memory function buttons for the power seat.(Option/accessory).
Using controls for door mirrors
Controls for door mirrors.
The door mirror positions are adjusted with the joystick in the driver’s door control panel. The car must be in usage mode Comfort or higher.
- Press the L button for the left-hand door mirror or the R button for the right-hand door mirror. The light in the button illuminates.
- Adjust the position with the joystick in the center.
- Press the L or R button again. The light should no longer be illuminated.
Fold in rearview mirrors electrically(Option/accessory)
The mirrors can be retracted for parking/driving in narrow spaces.
- Depress the L and R buttons simultaneously.
- Release them after approximately 1 second. The mirrors automatically stop in the fully retracted position.
Fold-out the mirrors by pressing down the L and R buttons simultaneously. The mirrors automatically stop in the extended position with the previous setting.
Resetting to neutral
Mirrors that have been moved out of position by an external force must be reset electrically to their original position for electric retracting/extending(Option/accessory) to work correctly.
- Fold in the door mirrors by pressing down the L and R buttons simultaneously.
- Fold them out again by pressing the L and R buttons simultaneously.
- Repeat the above procedure as necessary.
The mirrors are returned to their original position.
A door mirror can be angled down for the driver to view the side of the road when parking, for example. Engage reverse gear and press the L or R button. Note that the button needs to be pressed twice. The button flashes when the door mirror is angled down. When reverse gear is engaged, the door mirror automatically returns to its original position.
With this setting, the door mirrors are automatically angled down when reverse gear is selected. The folded position is preset and cannot be adjusted.
- Press
- Press Controls.
- Select the desired setting under the Exterior mirror’s tilt when reversing.
You can make the door mirrors return to their original positions by pressing the L or R button twice.
Automatic retraction when locking
Adjusting rearview mirror dimming
Bright light from behind could be reflected in the rearview mirrors and dazzle the driver. Use dimming when disturbed by light from behind.
Manual dimming
The interior rearview mirror can be dimmed with a control in the mirror’s lower edge.
- Use dimming by moving the control in towards the passenger compartment.
- Return to normal mode by moving the control towards the windscreen.
In cars with controls for manual dimming, there is no option for automatic(Option/accessory) dimming.
Automatic dimming (Option/accessory)
The interior rearview and door mirrors are dimmed automatically when driving in the dark. There is a lighter level of dimming for urban driving in the dark. It is possible to set whether automatic dimming should be active during driving or not via the center display.
- Press
- Press Controls.
- Select the desired setting under Mirror auto-dimming.
NoteIf the sensors are obscured by e.g. parking permits, transponders, sun visors or objects in the seats or in the cargo area in such a way that light is prevented from reaching the sensors, then the dimming function of the interior rearview and door mirrors is reduced.
Using a stored position for seat and door mirrors
If the positions for the power( Option/accessory) seat and the door mirrors have been stored, they can be activated by using the memory buttons.
Using a stored setting
A stored setting can be used with the front door either open or closed:
Open front door
Depress one of the memory buttons 1 (2) or 2 (3) with a short press. The power seat and door mirrors move and then stop at the positions stored in the selected memory button.
Closed front door
Hold one of the memory buttons 1 (2) or 2 (3) depressed until the seat and door mirrors stop in the positions that are stored in the selected memory button.
If the memory button is released, the movement of the seat and door mirrors will be stopped.
- Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.
Storing a position for seat and door mirrors
You can store the position for the power (Option/accessory)seat and door mirrors in the memory buttons. Store two different positions for the power seat (Option/accessory)and the door mirrors using the memory buttons. The buttons are located on the inside of one of the front doors or both.(Option/accessory).
- Button M for storing settings.
- Memory button.
- Memory button.
Storing a position
- Adjust seat and door mirrors to the desired position.
- Press and hold the M button depressed. The light indicator in the button illuminates.
- Within three seconds, press and hold the 1 or 2 buttons.
>When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes. If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place. The seat or the door mirrors must be readjusted before a new memory can be set.
Activating and deactivating the heated rear window and door mirrors
The heated rear window and door mirrors are used to quickly remove mist and ice from the windows and mirrors.
Activating and deactivating heated rear window and door mirrors from the center console
In the center console is a physical button for rapid access to the heated rear window and door mirrors.
Physical button in the center console.
Press the button.
>Heated rear window and door mirrors are activated/deactivated and the button illuminates/extinguishes.
Activating and deactivating heated rear window and door mirrors from the center display
- Open the climate view in the center display by tapping on the temperature button at the bottom center of the center display.
Tap on the button for the heated rear window and door mirrors.
>Heated rear window and door mirrors are activated/deactivated and the button illuminates/extinguishes.
Activating and deactivating automatic starting of the heated rear window and door mirrors
The heated rear window and door mirrors are used to quickly remove mist and ice from the windows and mirrors.
It is possible to set whether the automatic starting of the heated rear window and door mirrors should be activated/deactivated when the driver is in the car. (Comfort usage mode) With automatic starting activated, electric heating will start when there is a risk of ice or mist on the window. The heating switches off automatically when the windscreen/window is sufficiently warm and the ice or misting is gone.
- Open the climate view in the center display by tapping on the temperature button at the bottom center of the center display.
- Press
- Select the desired setting under Auto rear defroster to activate/deactivate the automatic start of the heated rear window and door mirrors.