There is additional storage space under the bonnet. The car’s towing eye and emergency puncture repair kit are also stored in the cargo area.
Bag hooks
Along the sides
There is a bag hook in the side panel on each side of the cargo area. There are two bag hooks in the side panel on each side of the cargo area.
ImportantThe bag hooks may be loaded with a maximum of 5 kg (11 lbs).
Under the floor hatch(Option/accessory)
- Lift the handle in the centre of the cargo area floor and fold up the floor.
- Move the cargo area floor forward to upright position and fit it in the adjustment groove on each side.
>It is now possible to hang bags with handles at a suitable height on the hooks.
In glovebox
There is also an extensible hook in the glovebox that can be used for hanging up a bag.
First aid kit(Option/accessory)
Remove and store the parcel shelf
Removing parcel shelf
- Detach the parcel shelf’s lifting eyes on both sides.
- Unhook the parcel shelf at the front edge and remove it.
Parcel shelf storage beneath the cargo area floor
The removed parcel shelf can be stored under the cargo area floor.
- Fold up the cargo area floor and secure it in raised position with the support arm.
- Turn the upper side of the parcel shelf downwards and lower it into the space with the rear part facing forwards.
With folding cargo area floor(Option/accessory.)
Fold up the folding cargo area floor forwards to be able to lower the parcel shelf downwards with the upper side turned down and the rear part facing forwards. Fold the cargo area floor back to level position.
Folding up the cargo area floor
- Grip the handle to fold up the cargo area floor.
- Fold up the support arm and secure the end in the socket on the underside of the cargo area floor.
>The cargo area floor remains in the raised position.
ith folding cargo area floor
Lift the handle in the middle of the folding cargo area floor and fold it forwards.
Load retaining eyelets
Warning triangle
Storage spaces
The warning triangle is stored under the cargo area floor.
Folding up the warning triangle
- Lift the cargo area floor and take out the warning triangle that is attached using Velcro straps.
- Remove the warning triangle from the case, unfold it, and put the ends together.
- Fold-out the warning triangle’s support legs.
Follow the regulations for the use of a warning triangle. Position the warning triangle in a suitable place with regard to traffic. Return the warning triangle under the cargo area floor after use.
Release folding cargo area floor
- Press the lock spring as indicated by the arrow until it stops. Maintain the pressure.
-
At the same time, lift the cargo area floor a few millimetres up from the base.
- Release the pressure from the lock spring, but continue holding up the cargo area floor.
Carry on holding up the cargo area floor and press the lock spring on the other side as indicated by the arrow.
>If the actions in section 2 have been completed correctly, the cargo area floor should now have been released from its side brackets.
The cargo area floor can be placed carefully back onto the lock springs without being locked in position.
- Press on the cargo area floor to lock it back into its brackets.
>The tailgate is unlocked but remains closed.
>The side doors are still locked and the alarm is armed.(Option/accessory.) The lock and alarm indicator on the instrument panel extinguish in order to show that the entire car is not locked.
>You can open the tailgate by gripping the rubberized pressure plate underneath its lower edge.
>If the tailgate is not opened within 2 minutes then it is relocked and the alarm is re-armed.
Power-operated tailgate (Option/accessory)
Hold the key’s
>The tailgate is unlocked and opened, while the side doors remain locked and their alarm functions armed.(Option/accessory.)
Setting the max. opening for the electrically operated tailgate(Option/accessory.)
To adjust max. opening
- Open the tailgate manually – and stop it in the desired opening position.
- Press and hold the
>: Two acoustic signals sound to indicate that the set position has been saved.
Reset max. opening
- Open the tailgate manually to the fully open position.
- Press and hold the
>Two acoustic signals sound to indicate that the set position has been cleared.
Operating the tailgate with foot movement(Option/accessory)
- Opening and closing with foot movement
- Only unlocking with foot movement (lift up the tailgate manually to open it)
Note that the function for opening and closing with foot movement requires a power-operated tailgate.(Option/accessory)
The sensor is located in the center of the bumper. One of the car’s keys must be within range behind the car, approx. 1 meter (3 feet), for opening and closing, to be possible. This also applies to an already unlocked car in order to avoid accidental opening e.g. in a car wash.
Opening and closing with foot movement
Make one forward kicking motion in the sensor area under the rear bumper. Then take a step back. The bumper must not be touched.
>A short acoustic signal sounds when opening or closing is activated – the tailgate is opened/closed. If several kicking motions take place without a key sufficiently close, the opening will not be possible until after a certain delay. Do not leave your foot in the kicking motion under the car, this could cause the activation to fail.
Canceling opening or closing with foot movement
Make one forward kicking motion while opening or closing is in progress.
>Opening or closing the tailgate is stopped.
The key does not need to be in the vicinity of the car to cancel the opening or closing of the tailgate.
If the tailgate is stopped close to the closed position, the next activation will open the tailgate.
Unlocking the tailgate from the inside of the car
Press the
>The tailgate is unlocked and can be opened from the outside. With the power-operated tailgate option:(Option/accessory)
- Hold the instrument panel’s
>The tailgate is opened.
Keyless unlocking of tailgate(Option/accessory)
One of the car’s keys must be within range behind the car for unlocking to work.
The tailgate is held closed by an electrical lock. To open:
-
Press gently on the rubberized pressure plate beneath the tailgate handle.
>The lock is released. - Lift by the outside handle in order to open the tailgate.
- Handle the rubber panel with care to avoid damage to its electrical contact. Minimal force is required for activation.
- Do not exert the lifting force on the rubber panel when opening – lift the handle.
It is also possible to unlock the tailgate with a foot movement(Option/accessory) under the rear bumper, see separate section.