Speed related power steering causes the steering wheel force to increase with the speed of the car so as to be able to give the driver enhanced sensitivity. On motorways the steering is firmer. When parking and at low speed steering is light and requires less effort.
Reduced power In rare situations, the power steering may need to work at reduced power, and turning the steering wheel may then seem slightly heavier. This may occur when the power steering becomes too hot and it then needs temporary cooling. It may also occur if the power supply is disrupted.
While the power steering is working at reduced power, the driver support functions and steering assistance systems are not available.
Warning If the temperature increases too much, the servo may be forced to switch off completely. In such a situation, the driver display shows the Power steering failureStop safely message, combined with a symbol.
Change the steering force level
Steering wheel resistance can be adjusted when using INDIVIDUAL drive mode.
Tap on Settings in the centre display’s top view.
Select My CarDrive ModesSteering Force.
Steering wheel resistance selection can only be accessed if the car is stationary or is moving at low speed and in a straight line.
Steering wheel controls and horn
The steering wheel houses the horn and controls for e.g. the driver support systems and voice control.
Keypads in the steering wheel.
Controls for driver support systems.
Controls for voice control and menu, message and phone handling.
Horn
The horn is located in the centre of the steering wheel.
Adjusting the steering wheel
The steering wheel can be adjusted in different positions.
The steering wheel can be adjusted for height and for depth.
Warning Adjust and secure the steering wheel before driving away. The steering wheel must never be adjusted while driving.
Lever for steering wheel adjustment.
Push the lever forwards to release the steering wheel.
Adjust the steering wheel to the position that suits you.
Pull the lever back to fix the steering wheel in place. If the lever is stiff, press or raise the steering wheel slightly at the same time as you move the lever back.
Steering lock
Steering lock makes it difficult to steer the car if it is stolen, for example. A mechanical noise can be perceived when the steering lock is locked or unlocked.
Activating the steering lock
The steering lock is activated when the car is locked from the outside and the car is switched off. If the car is left unlocked then the steering lock will be activated automatically after a while.
Deactivating the steering lock The steering lock is deactivated when the car is unlocked from outside. If the car is not locked, the steering wheel lock will be deactivated as long as the remote control key is in the passenger compartment and the car is started.
Activating and deactivating the heated steering wheel
The steering wheel can be heated in order to increase comfort for the driver when it is cold.
Press the driver’s side steering wheel and seat button in the climate row of the centre display in order to open the controls for seat and steering wheel.
If the car is not equipped with heated seats or ventilated seats, the button for heated steering wheel is immediately available in the climate row.
Repeatedly press the button for heated steering wheel in order to change between the four levels: Off, High, Medium and Low.
The level changes and the button shows the set level.
Activating and deactivating automatic start of heated steering wheel
The steering wheel can be heated in order to increase comfort for the driver when it is cold.
It is possible to set whether automatic start of heated steering wheel should be activated/deactivated when the engine is started. With automatic start activated, heating will start in the event of low ambient temperature.
Press Settings in the top view in the centre display.
Press Climate.
Select Auto Steering Wheel Heating Level to activate/deactivate automatic start of heated steering wheel.
An “A” is shown at the button for heated steering wheel in the climate row when automatic starting has been activated.
Select Low, Medium or High to select level after the function has been activated.