2022 Toyota Camry Warning lights and indicators
Warning lights and indicators
The warning lights and indicators on the instrument cluster, center panel, and outside rearview mirrors inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustrations dis-play all warning lights and indicators illuminated.
4.2-inch display
7-inch display
The units used on the meters and some indicators may differ depending on the target region.
Warning lights
Warning lights inform the driver of malfunctions in the indicated vehicle’s systems.
- These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or turn off. Has the vehicle been inspected by your Toyota dealer?
- This light illuminates the multi-information display with a message.
- This light flashes to indicate a malfunction.
- This light illuminates the center panel.
Indicators
The indicators inform the driver of the operating state of the vehicle’s various systems.
- These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or turn off. Has the vehicle been inspected by your Toyota dealer?
- This light does not turn on when the system is disabled.
- This light turns on when the system is off.
- This light flashes to indicate that the system is operating.
- These indicators will illuminate in the following situations to indicate that the system’s initial check is being performed:
• When the BSM function or RCTA function is enabled and the engine switch is turned to the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system).
• When the engine switch is in the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) and the BSM function is enabled.
• When the engine switch is in the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) and the RCTA function is enabled. (At this time, a buzzer will also sound.)
The indicators will turn off after a few seconds. If the indicators do not illuminate or turn off, or if a buzzer does not sound when the RCTA function is enabled, the system may malfunction. Has the vehicle been inspected by your Toyota dealer? - This light illuminates the outside rearview mirrors.
- This light illuminates the center panel.
- When the outside temperature is approximately 37°F (3°C) or lower, this indicator will flash for approximately 10 seconds, then stay on.
WARNING
If a safety system warning light does not come on Should a safety system light such as the ABS and SRS warning lights not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Has the vehicle been inspected by your Toyota dealer immediately if this occurs?