The multi-information display presents the driver with a variety of driving-related data, such as the current outside temperature. The multi-information display can also be used to change the display settings and other settings.
The content display area is operated using the meter control switches.
When the screen can be scrolled or different content can be displayed, a mark, such as an arrow, will be displayed to suggest which switch to operate.
Items in this area are operated using the “ODO/TRIP” switch.
Select a menu icon to display its content.
Displayable item | Content | |
Gadget content | Fuel economy type | |
Average vehicle speed | Trip (after start) | Displays the average vehicle speed since engine start. |
Total (after reset) | Displays the average vehicle speed since the display was reset.*5 | |
Distance | Trip (after start) | Displays the distance driven since vehicle start. |
Total (after reset) | Displays the distance driven since the display was reset.*5 | |
Elapsed time | Trip (after start) | Displays the elapsed time since engine start. |
Total (after reset) | Displays the elapsed time since the display was reset.*5 |
Eco indicator
This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
Use the meter control switches on the steering wheel to change settings.
LTA (Lane Tracing Assist)
Press and hold
Item | Settings | Details |
Lane center | On | Select to enable/disable the lane centering function. |
Off | ||
Alert sensitivity | High | Select to set the warning sensi- tivity. |
Std. | ||
Sway warning | On | Select to enable/disable the vehi- cle sway warning. |
Off | ||
Sway sensitivity | High | Select to set the vehicle sway warning sensitivity. |
Std. | ||
Low |
PCS (Pre-Collision System)
Press and hold
Item | Settings | Details | |
PCS | On | Select to enable/disable the pre- collision system. | |
Off | |||
Warning sensitivity | Early | Select to change the warning timing. | |
Middle | |||
Late |
DRCC (Dynamic Radar Cruise Control)
Press and hold
Item | Settings | Details | |
Curve speed reduction | Strong | Select to change the vehicle speed reduction strength. | |
Weak | |||
Off |
BSM (Blind Spot Monitor) (if equipped)
Press to enable/disable the Blind Spot Monitor function.
Item | Settings | Details |
BSM | On | Select to enable/disable the Blind Spot Monitor function. |
Off |
Press and hold to change the settings of the following item:
Item | Settings | Details | |
Outside rear view mirror indicator brightness | Bright | Select to change the brightness of the outside rear view mirror indicators. | |
Dim | |||
Notification timing for presence of approaching vehi- cle (sensitivity) | Early |
Select to change the notification timing for an approaching vehi- cle. | |
Middle | |||
Late | |||
Only when vehicle detected in blind spot |
RCTA (Rear Cross Traffic Alert) (if equipped)
Press to enable/disable the Rear Cross-Traffic Alert function.
Item | Settings | Details |
RCTA | On | Select to enable/disable the Rear Cross Traffic Alert function. |
Off |
Press and hold
Item | Settings | Details |
RCTA buzzer vol- ume | 1 (Low) | Select to change the volume of the RCTA buzzer. |
2 (Medium) | ||
3 (Loud) |
RCD (Rear Camera Detection) function (if equipped)
Press to enable/disable the rear camera detection function.
Item | Settings | Details |
RCD | On | Select to enable/disable the rear camera detection. |
Off |
PKSB (Parking Support Brake) (if equipped)
Press to enable/disable the Parking Support Brake.
Item | Settings | Details |
PKSB | On | Select to enable/disable the Parking Support Brake system. |
Off |
Intuitive parking assist (if equipped)
Press to enable/disable the Intuitive parking assist.
Item | Settings | Details |
Intuitive parking assist | On | Select to enable/disable the intui- tive parking assist. |
Off |
Press and hold
Item | Settings | Details |
Volume | 1 (Low) | Select to change the volume of the intuitive parking assist buzzer. |
2 (Medium) | ||
3 (Loud) |
HUD (Head-up display) (if equipped)
Press to enable/disable the head-up display.
Item | Settings | Details |
HUD | On | Select to enable/disable the head-up display. |
Off |
Press and hold
Item | Settings | Details |
HUD Brightness/Position | Select to adjust the brightness/ position of the head-up display. • Press the / switch to adjust the display brightness. • Press the / switch to adjust the display position. | |
HUD Driving sup- port | Tachometer set- tings | Select to change the display between the following: • Eco Driving Indicator • Tachometer • No content |
Navigation sys- tem (if equipped) |
Select to enable/disable head-up display content. | |
Driving Assist | ||
Compass (if equipped) | ||
Rotation | Select to adjust the angle of the head-up display. Press the / switch to adjust the display angle. |
RSA (Road Sign Assist) (if equipped)
Press and hold
Item | Settings | Details | ||||
RSA | On | Select RSA. | to | enable/disable | the | |
Off | ||||||
Notification method |
Excess notification |
speed | Select a notification method used to warn the driver if the vehicle speed exceeds the speed dis- played on the speed limit sign on the multi-information display. Available methods: • No notification • Display only • Display and buzzer | |||
Other notifications | Select a notification method used to warn the driver if the system detects the vehicle approaching to the no-entry road when a do not enter sign is displayed on the multi-information display. Available methods: • No notification • Display only • Display and buzzer | |||||
Excess speed noti- fication level | 5 mph (10 km/h) | Select a speed threshold over which the excess speed notifica- tion will start to operate when a speed limit sign is displayed on the multi-information display. | ||||
3 mph (5 km/h) | ||||||
1 mph (2 km/h) |
Press and hold
Item | Settings | Details |
TPWS (Tire pressure warning system) | ||
Set pressure (tire pressure warning sys- tem initialization) | Select to initialize the tire pres- sure warning system. To per- form initialization, press and hold the switch. Before performing initialization, make sure to adjust the inflation pressure of each tire to the spec- ified level. | |
Change wheel (change the tire pres- sure warning system sensor ID code set) (vehicles without a tire inflation pres- sure display function) | Select to change the tire pres- sure warning system sensor ID code set. To enable this function, a second set of tire pressure warning sys- tem sensor ID codes must be registered by a Toyota dealer. For information regarding chang- ing the registered ID code set, contact your Toyota dealer.
| |
Change wheel (register tire pressure warning system sensor ID codes) (vehi- cles with a tire inflation pressure display function) | Select to register the ID codes of the tire pressure sensors to the tire pressure warning system. To register the ID codes, press and hold the switch. | |
Rear seat reminder | On | Select to enable/disable the rear seat reminder. |
Off | ||
Scheduled maintenance display (if equipped) | ||
Maintenance data reset | Select to reset the message indi- cating maintenance is required, after the required maintenance is performed. |
Press and hold
Item | Settings | Details |
Language | Select to change the language displayed. | |
Units | Select to change the units of measure displayed. | |
(Eco Driving Indicator Light) | On | Select to enable/disable the Eco Driving Indicator Light. |
Off | ||
Speedometer | On | Select to enable/disable the speedometer display. |
Off | ||
Gadget content | Off | No display |
Average vehicle speed | Select to turn the display of a gadget. | |
Distance | ||
Elapsed time | ||
Fuel economy type | Trip (after start)*1 | Select to change the average fuel consumption display and an item to be displayed as gadget. |
Total (after reset) | ||
Tank (after refuel)*2 | ||
Multi-information display off | Select to turn the multi-informa- tion display off. To turn the multi-information dis- play on again, press any direc- tion switch | |
Pop-up display | Intersection guid- ance (if equipped) |
Select to enable/disable the pop- up display. |
Incoming calls | ||
Brightness adjust- ment | ||
Default setting | Select to reset the meter display settings to the default setting. |
Odometer
Displays the total distance the vehicle has been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis-play different distances independently.
To reset, display the desired trip meter and press and hold the “ODO/TRIP” switch.
Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. The suggestion function can be turned on/off. (Customizable features:
Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the engine switch has been turned off, if the headlight switch is in the “AUTO” position, a suggestion message will be displayed asking if you wish to turn the headlights off. To turn the headlights off, select “Yes”. If a front door is opened after the engine switch is turned off, this suggestion message will not be displayed.
Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
Suspension of the settings display
Tire pressure
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
Customization
Some functions can be customized.
WARNING
NOTICE
While setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…