2022 Toyota Camry Head-up display
Head-up display
Summary of functions
The head-up display is linked to the meters and navigation system (if equipped) and projects a variety of information in front of the driver, such as the current vehicle speed.
- Driving assist system status/navigation system-linked display area (if equipped)
The following pop-up displays will be displayed in certain situations: - Pre-collision warning (pre-collision system)
- Alert from the Parking Support Brake system (if equipped)
- Shift position/speed limit/RSA (Road Sign Assist) display area
- Shift position
- Speed limit (vehicles with a navigation system) (the U.S.A. only)
- RSA (Road Sign Assist) display (if equipped)
- Vehicle speed display
- Eco Driving Indicator/Tachometer
- Information display area
The following pop-up displays will be displayed in certain situations: - Warning/message
- Hands-free system status
- Audio system operation status
Using the head-up display
Select on the multi-information display and then
- Enabling/disabling the head-up display
- Press to enable/disable the head-up display.
- Changing the head-up display settings
- Press and hold to change the following settings:
- Eco Driving Indicator/Tachometer
- Select to display Eco Driving Indicator/tachometer/no content.
- Display brightness/position
- Select to adjust the brightness and position of the head-up display.
- Display content
Select to enable/disable the following items: - Route guidance to destination (if equipped)
- Driving assist system status
- Compass (if equipped)
- Display angle
- Select to adjust the angle of the head-up display.
Driving assist system status/navigation system-linked display area (if equipped)
- Driving assist system status display
Displays the operational status of the following systems:
- Dynamic radar cruise control with full-speed range
- LTA (Lane Tracing Assist)
- RSA (Road Sign Assist) (if equipped)
- Intuitive parking assist (if equipped)
- Navigation system-linked display area (if equipped)
- Displays the following items, which are linked to the navigation system:
- Street name
- When the navigation system is performing route guidance, the name of the next street will be displayed on the top of the display area.
- Route guidance to the destination
- Displayed when the navigation system is performing route guidance.
- When approaching an intersection, an arrow will be displayed to indicate the suggested direction of travel.
- Compass
- Displays the direction of travel.
Eco Driving Indicator/Tachometer
Eco Driving Indicator
- Eco Driving Indicator Zone Display
- Eco-driving ratio based on acceleration
- Zone of Eco-driving
- The displayed content is the same as that displayed on the multi-information display (Eco Driving Indicator). For details, refer to
Tachometer
Displays the engine speed in revolutions per minute.
Information display area
Displays the following items in the appropriate situation:
- Warning/Message
- Alert from the LTA (Lane Tracing Assist)
- Dynamic radar cruise control with full-speed range
- Brake Override System/Drive-Start Control
- message
- Displayed when a suggestion/advice pop-up display is displayed on the multi-information display.
- message
- Displayed when a warning message is displayed on the multi-information display.
- Outside temperature
Displayed in the following situations: - When the engine switch is turned to IGNITION ON mode
- When the low outside temperature indicator is flashing Displayed content is the same as that displayed on the multi-information display. For details, refer to the explanation of the outside temperature display on the multi-information display.
- Hands-free system status
- Displayed when the hands-free system is operated.
- Audio system operation status
- Displayed when the audio system is operated.
- Head-up display
- The head-up display may seem dark or hard to see when viewed through sunglasses, especially polarized sunglasses.
- Adjust the brightness of the head-up display or remove your sunglasses.
- Display brightness
- The brightness of the head-up display can be adjusted on of the multi-information display. Also, it is automatically adjusted according to the ambient brightness.
- Enabling/disabling of the head-up display
- If the head-up display is disabled, it will remain disabled when the engine switch is turned off and then back to IGNITION ON mode.
- Street name display (vehicles with a navigation system) Only street names that are included in the map data will be displayed.
WARNING
- Before using the head-up display
- Check that the position and brightness of the head-up display image do not interfere with safe driving. Incorrect adjustment of the image’s position or brightness may obstruct the driver’s view and lead to an accident, resulting in death or serious injury.
- Do not continuously look at the head-up display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
- Caution for changing settings of the head-up display
- As the engine needs to be running while changing the settings of the head-up display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
- To prevent damage to components
- Do not place any drinks near the head-up display projector. If the projector gets wet, electrical malfunctions may result.
- Do not place anything on or put stickers onto the head-up display projector. Doing so could interrupt head-up dis-play indications.
- Do not touch the inside of the head-up display projector or thrust sharp edges or the like into the projector. Doing so could cause mechanical malfunctions.
- When changing the settings of the head-up display
- To prevent battery discharge, ensure that the engine is running while changing the settings of the head-up display.