Model Y

2021 Tesla Model Y Windows Owners Manual

2021 Tesla Model Y Windows

Opening and Closing

Press down on a switch to lower the associated window. Window switches operate at two levels:

  • To lower a window fully, press the switch all the way down and immediately release.
  • To lower a window partially, press the switch gently and release when the window is where you want it.

Similarly, pull a switch to raise the associated window:

  • To raise a window fully, pull the switch all the way up and immediately release.
  • To raise a window partially, pull the switch gently and release when the window is where you want it.

If a window is left open unintentionally, Model Y can send a notification to the mobile app (touch Controls > Locks > Car Left Open Notification, then choose Doors & Windows).

You can also enable Close Windows on Lock by touching Controls > Locks > Close Windows on Lock. When enabled, your vehicle automatically closes the windows when Model Y locks.

Note
See Cold Weather Best Practices for information on preparing windows for cold weather.
CAUTION
To avoid damage, windows automatically lower slightly when you open or close a door. If you manually raise a window when the door is open, ensure it is slightly lowered before closing the door.
Warning
Before closing a window, it is the driver’s responsibility to ensure that all occupants, especially children, do not have any body parts extended through the window’s opening. Failure to do so can cause serious injury.

Locking Rear Windows

To prevent passengers from using the rear window switches, touch Controls > Locks > Window Lock. To unlock the rear windows, touch Window Lock again.

Warning
To ensure safety, it is recommended that you lock the rear window switches whenever children are seated in the rear seats.
Warning
Never leave children unattended in Model Y.

Calibrating Windows

In the unlikely event that a window behaves unexpectedly (touches the bright molding, fails to open or close properly, goes down more than normal when the door opens, etc.), you can calibrate it to potentially fix the issue.

To calibrate a window:

  1. Close the door with the affected window.
  2. Sit in the driver’s seat and close the driver door.
  3. Using the window’s switch on the driver’s door, raise the affected window until it stalls.
  4. Using the window’s switch on the driver’s door, lower the affected window until it stalls.
  5. Repeat step 3 and raise the affected window until it stalls.

The window should now be calibrated. If the issue continues after attempting the calibration procedure a couple times, contact Tesla

Automotive Solutions

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

8 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

8 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago