Wipers
To perform a single wipe with the windshield wipers, press and immediately release the button on the end of the turn signal stalk. You can access the wiper settings from the main Controls screen to adjust the speed of the wipers:
- Intermittent, slow
- Intermittent, fast
- Continuous, slow
- Continuous, fast
Auto: Model 3 detects whether or not it is raining. When wipers are set to Auto and liquid is detected on the windshield, Model 3 determines the optimal frequency at which they should wipe. If Model 3 does not detect liquid on the windshield, the wipers do not wipe.
For one-touch access to the wipers, you can add the wiper control to My Apps. See Customizing My Apps.
Note
You can also adjust the windshield wiper speed and frequency using voice commands (see Voice Commands).
Autopilot requires wipers to be set to AUTO for vehicles manufactured after approximately April 27, 2021. This setting is automatic and you cannot change it.
CAUTION
Ensure the wipers are off before washing Model 3 to avoid the risk of damaging the wipers. Periodically check and clean the edge of the wiper blades. If a blade is damaged, replace it immediately. For details on checking and replacing wiper blades, see Wiper Blades and Washer Jets. To avoid damaging the hood, ensure that the hood is fully closed before using the windshield wipers. In harsh climates, ensure that the wiper blades are not frozen or adhered to the windshield. Remove ice from the windshield before using the wipers. Ice has sharp edges that can damage the rubber on the blades.