2021 Tesla Model 3

2021 Tesla Model 3 Front and Rear Seats Owners Manual

by
Contents hide
1 2021 Tesla Model 3 Front and Rear Seats
2 Correct Driving Position
3 Adjusting the Front Seats
4 Folding Rear Seats
5 Raising Rear Seats
6 Head Supports
6.1 Raising/Lowering the Rear Center Head Support
6.2 Removing/Installing a Head Support
7 Seat Heaters
8 Seat Covers

2021 Tesla S logo

2021 Tesla Model 3 Front and Rear Seats

2021 Tesla Model 3

Correct Driving Position

The seat, head support, seat belt, and airbags work together to maximize your safety. Using these correctly ensures greater protection.

2021 Tesla Model 3 Front and Rear Seats-Fig-01

Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:

  1. Sit upright with both feet on the floor and the seat back reclined no more than 30 degrees.
  2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheel. Your chest should be at least 10 inches (25 cm) from the center of the airbag cover.
  3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt tightly across your hips, not across your stomach.

Model 3 seats include integrated head supports that cannot be adjusted or removed.

Adjusting the Front Seats

2021 Tesla Model 3 Front and Rear Seats-Fig-02
  1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
  2. Adjust backrest.
  3. Adjust lumbar support (if equipped).
Warning
Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects). Do not adjust seats while driving. Doing so increases the risk of a collision. Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees when the vehicle is moving.

Folding Rear Seats

Model 3 has a split rear seat that can fold forward.

Note
Driving with the rear seats folded forward can increase the amount of perceived noise and/or vibration coming from the rear of the vehicle (trunk, suspension, etc.).

Before folding, remove items from the seats and the rear footwell. To allow the rear seat backs to fold completely flat, you may need to move the front seats forward.

2021 Tesla Model 3 Front and Rear Seats-Fig-03

To fold a rear seat, pull the corresponding lever and fold the seat forward.

2021 Tesla Model 3 Front and Rear Seats-Fig-04

Raising Rear Seats

Before raising a rear seat, make sure that the seat belts are not trapped behind the backrest. Pull the seat back upward until it locks into place. To confirm that the seat back is locked in the upright position, try pulling it forward.

Warning
Always ensure the seat backs are locked in their upright position by pushing it forward or rearward. Failure to do so increases the risk of injury.

Head Supports

The front seats and the second row outboard seats include integrated head supports that are not adjustable.

The rear center seat includes an adjustable head support that can be raised, lowered, or removed. When occupied by a passenger that is not seated in a child safety seat, the head support should always be raised and locked into position (so that the center is aligned with the center of the occupant’s head).

2021 Tesla Model 3 Front and Rear Seats-Fig-05
Warning
To minimize the risk of severe injury or death in the event of a collision, ensure that head supports are positioned correctly before sitting in, or operating, Model 3. When installing a seat belt retained child safety seat in the center seating position in the second row, you must lower the associated head support (described next).

Raising/Lowering the Rear Center Head Support

To raise the head support, lift it until you hear it click into place. Push down on the head support to ensure that it is secure.

To lower the head support, press and hold the button on the outer base of the right post and press the head support down.

2021 Tesla Model 3 Front and Rear Seats-Fig-06

Removing/Installing a Head Support

To remove the head support:

  1. Raise the head support as described above.
  2. Press and hold the button on the outer base of the right post.
  3. Insert a short, flat object (such as a small flat-head screwdriver) into the opening on the inside base of the left post and pull the head support upward.
    2021 Tesla Model 3 Front and Rear Seats-Fig-07

To re-install the head support:

  1. With the front of the head support facing forward, insert both posts into the corresponding holes on the seat back.
  2. Press down on the head support until it clicks into place.
  3. Pull up on the head support to ensure that it is secure.
    Warning
    Ensure that the head support is correctly installed before seating an occupant. Failure to do so increases the risk of injury or death if a collision occurs.

Seat Heaters

The front and rear seats contain heating pads that operate at three levels from 3 (highest) to 1 (lowest). To operate the seat heaters, see Climate Controls.

Warning
To avoid burns resulting from prolonged use, individuals who have peripheral neuropathy, or whose capacity to feel pain is limited because of diabetes, age, neurological injury, or some other condition, should exercise caution when using the climate control system and seat heaters.

Seat Covers

Warning
Do not use seat covers in Model 3. Doing so could restrict the deployment of the seat-mounted side airbags if a collision occurs. Also, if the vehicle is equipped with an occupant detection system that is used to determine the status of the passenger front airbag, seat covers may interfere with this system.

Leave a Comment