Outback

2022 Subaru Outback USB Power Supply User Manual

2022 Subaru Outback USB Power Supply

USB Power Supply

CAUTION

  • The specification of a USB terminal that can be used is the A-type. If a different specification of the terminal is connected, power supply or charging may not be possible, or the device may malfunction.
  • There is a risk that a connected device may malfunction or data may be damaged. The connection of a device shall be performed at your responsibility.
  • To avoid an electric shock or a malfunction, observe the following precautions.
    • Do not connect a USB hub.
    • Do not insert any metal or other foreign object into the USB terminal.
    • Do not spill water or other liquid on the USB terminal.
  • Be careful not to pull the connected cable. Doing so could break the USB terminal and the connected device.
  • If a device is connected for a long time when the engine is not running, doing so may cause the risk of a discharged battery. Even when the engine is running, we recommend that you do not connect a device for an unnecessarily long time.
  • Do not connect a malfunctioning device. Doing so may cause the risk of smoke and fire.

NOTE

  • The rated voltage of each USB terminal is 5 V/2.1 A (a total of 4.2 A). For details about the maximum rated power, refer to “How to Use the USB Power Supply” FP315. Before connecting a device, be sure to read the instruction manual of the device and check whether or not this specification of the output is supported by the device. If a device that requires power exceeding the maximum rating is connected, power supply or charging may not be possible. Even if charging could be completed, the time required for charging may be longer than when the genuine charger for that device is used. . Depending on the device, charging may be possible only when a special cable is used. In this case, be sure to connect the device using a special cable.
  • When a device that communicates with a PC is connected, power supply or charging may not be possible.
  • When connecting a device for charging, disconnect the device promptly after charging is completed.

How to Use the USB Power Supply

Front seat USB power supply (an audio device can be connected and used)

Console USB power supply (charge only) (if equipped)

  • Use the USB terminal to use or charge an electronic device.
  • When using the USB, open the USB power supply cover. After use, close it.
  • When the ignition switch is in the “ACC” or “ON” position, the power can be supplied to the electronic device. Up to 5 V/2.1, A can be supplied from each terminal (total of 4.2 A).
Automotive Solutions

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

7 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

7 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago