2022 Subaru Outback Seat Heater User Manual

2022 Subaru Outback Seat Heater (If Equipped)

Seat Heater (If Equipped)

The seat heater operates when the ignition switch is in the “ON” position.

CAUTION

• Do not put hard or heavy objects or ones with protrusions on the seat, and do not stab the seat with sharp objects, such as pins or needles.
• People with delicate skin may suffer slight burns even at low temperatures if they use the seat heater for a long period of time. When using the heater, always be sure to warn the persons con-cerned.
• Do not put anything on the seat which insulates against heat, such as a blanket, cushion, or similar items. This may cause the seat heater to overheat.
• When the seat is warmed enough or before you leave the vehicle, be sure to turn off the seat heater.

NOTE

• Use of the seat heater for a long period of time, while the engine is not running, can cause battery discharge.
• When using for a long period of time, we recommend setting the heater to the MID or LOW position. Use the HIGH position for only quick heating at the start of the function usage.

Front Seat Heater

Adjust the front seat heater function on the center information display. Refer to “Front Seat Heater” FP295.

NOTE
The front seat heater function cannot be used simultaneously with the seat ventilation (if equipped).

Rear Seat Heater

CAUTION
Do not open and close the center console lid while operating the rear seat heater switch. There is the risk of fingers being caught in the lid.

Rear seat heater switches

1. Front passenger’s side
2. Indicator lights
3. Driver’s side

Press the rear seat heater switch. Each time you press the switch, the mode will change as follows.

• HIGH:
  2 indicator lights are illuminated.
• LOW:
  1 indicator light is illuminated.
• OFF:
  All indicator lights turn off.

Selecting “HIGH” mode will cause the seat to heat up quicker.

NOTE
Only the front seat heater switches retain the previous switch position even if the vehicle has restarted. The rear seat switch will reset.