Select the preferred airflow mode by the following operation.
Via the climate control screen
Airflow modes are as follows.
Ventilation: Instrument panel outlets
Ventilation 2: Instrument panel outlets and foot outlets
Bi-level: Instrument panel outlets and the foot outlets
Heat: Foot outlets, both side outlets of the instrument panel, and some through windshield defroster outlets (A small amount of air flows to the windshield and both side windows to prevent fogging.)
Heat-def: Windshield defroster outlets, foot outlets, and both side outlets of the instrument panel
Perform the following operation to regulate the temperature of airflow from the air outlets.
Temperature control buttons
Press the temperature control button to the blue side (cool) or the red side (warm).
Temperature control screen
Max A/C mode
For quicker cooling, touch “MAX A/C” on the climate control mode select button or customizable icon. When the Max A/C mode is on, the following settings will be changed automatically.
To turn off the Max A/C mode and return to the previous setting, touch “MAX A/C” again.
SYNC mode (11.6-inch display models)
When the SYNC mode is turned on, both the driver’s and passenger’s side temperatures are synchronized using the driver’s side temperature control button and temperature control display.
The SYNC mode indicator will turn white. Touch “SYNC” again, press the passenger’s side temperature control button or operate the passenger’s side temperature control bar to cancel the SYNC mode. The SYNC mode indicator will be grayed out. In this case, temperature control on the driver’s side and the passenger’s side will be separated. The temperature will be controlled individually using the driver’s and passenger’s temperature control buttons and the driver’s and passenger’s temperature control bar.
Select the preferred fan speed by the following operation.
Via the fan speed indicator
Touch
Via the fan speed control screen
The air conditioner operates only when the engine is running. Perform the following operation while the fan is in operation to turn on the air conditioner.
To turn off the air conditioner, touch “A/C” again. The indicator light will turn off or it will be grayed out.
NOTE For efficient defogging or dehumidifying in cold weather, turn on the air conditioner. However, if the ambient temperature decreases to approximately 328F (08C), the air conditioner and dehumidification system may not work properly.
Select the air inlet by pressing the air inlet selection button.
Recirculation mode: Interior air is recirculated inside the vehicle. This mode is used for the following cases.
Perform the following operation to select this mode.
Outside air circulation mode: Outside air is drawn into the passenger compartment. This mode is used for the following cases.
Perform the same operation as the recirculation mode to change the mode. will be displayed on the climate control mode indicator.
WARNING
Continued operation in the recirculation mode may fog up the windows. Switch to the outside air circulation mode as soon as the outside dusty condition clears.
To turn off the climate control system, touch the climate control ON/OFF button.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…