2022 Subaru Outback Clock
Clock
For models with a genuine SUBARU navigation and/or audio system, the clock can be adjusted using either auto mode or manual mode.
Setting the Clock Manually
Dual 7.0-inch display models
- Turn the ignition switch to the “ON” position.
- Press (HOME).
- Touch (Settings).
- “General”
- “Clock”
- “Time Setting”
- “Manual”
- or
- “OK”
NOTE
The clock setting screen can also be displayed by touching the clock on the status bar.
11.6-inch display models
- Turn the ignition switch to the “ON” position.
- Touch (HOME).
- (Settings)
- “General”
- “Clock”
- “Time Setting”
- “Manual”
- or
- “OK”
NOTE
The clock setting screen can also be displayed by touching the clock on the status bar.
Setting the Clock Automatically
Dual 7.0-inch display models
- Turn the ignition switch to the “ON” position.
- Press (HOME).
- Touch (Settings).
- “General”
- “Clock”
- “Time Setting”
- “Sync With Phone”
The clock will be set and adjusted automatically when a smartphone is connected via Bluetooth® for transferring phonebook data.
- Register the smartphone to the audio system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system.
- Transfer phonebook data to the system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system.
The clock will be adjusted automatically.
NOTE
Depending on the model of the smartphone, the settings of the connected smartphone may need to be changed. (ex: For iOS or other models, notification settings may need to be activated.)
For details, check the instructions on connecting smartphones.
11.6-inch display models
- Turn the ignition switch to the “ON” position.
- Touch (HOME).
- (Settings)
- “General”
- “Clock”
- “Time Setting”
- Models with navigation system: >“AUTO”
Models with SUBARU STARLINK Safety and Security without navigation system: > “AUTO”
Models without SUBARU STARLINK Safety and Security or navigation system: > “Sync With Phone”
Models with navigation system
The clock will be set automatically where a GPS signal is available.
Models with SUBARU STARLINK Safety and Security without navigation system
The clock will be set automatically where a DCM (Data Communication Module in vehicle cellular connection) signal is available.
Models without SUBARU STARLINK Safety and Security or navigation system
The clock will be set and adjusted automatically when a smartphone is connected via Bluetooth® for transferring phonebook data.
- Register the smartphone to the audio system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system.
- Transfer phonebook data to the system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system.
The clock will be adjusted automatically.
NOTE
Depending on the model of the smartphone, the settings of the connected smartphone may need to be changed. (ex: For iOS or other models, notification settings may need to be activated.)
For details, check the instructions on connecting smartphones.