2022 Subaru Outback Center Information Display (CID) User Manual

2022 Subaru Outback Center Information Display (CID)

WARNING
Always pay attention to safe driving when operating the center information display while the vehicle is in motion. When operation of the center information display is disturbing your awareness and ability to concentrate on driving, stop the vehicle in a safe place before performing operations on the display. Also, do not concentrate on the display while driving. Doing so could result in an accident.

Features

All information is displayed on the center information display, including vehicle settings, vehicle status, navigation system (if equipped) operation, audio operation, and air conditioning operation.

Items	Page for 11.6-inch display models	Page for dual 7.0- inch display models
Interruption screen	212
Vehicle status and maintenance in- formation	214	242
Vehicle settings	219	237/240
Climate control operations	219	237
Front View Moni- tor (if equipped)/ Rear view camera	351/383
Navigation system	Refer to the navigation/ audio Owner’s Manual.
Audio/telephone	Refer to the navigation/ audio Owner’s Manual.
EyeSight	Refer to the Owner’s Manual supplement for the EyeSight system.

The center information display can also be used to set and initialize the center information display itself.

NOTE

• When the vehicle is in motion, certain functions and selections may not be available.
• The language and units for both the center information display and the combination meter display (color LCD) can be changed. For details about language settings, refer to “General settings” P219 (11.6- inch display models) or “General settings” P237 (dual 7.0-inch display models). For details about unit settings, refer to “Car settings” P223 (11.6-inch display models) or “Vehicle setting icons” P242 (dual 7.0-inch display models).
• The images displayed in this Owner’s Manual are sample images. The actual image may vary depending on the region and vehicle specifications.

Welcome Screen

Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’s door is opened and closed, the welcome screen will appear for a short time.

NOTE

• The welcome screen will disappear when the ignition switch is turned to the “ON” position while the welcome screen is shown.
• The welcome screen can be turned on or off. For details, refer to “General settings” P219 (11.6-inch display models) or “General settings” P237 (dual 7.0-inch display models).
• For a certain period of time after the welcome screen has once appeared, it may not appear again even when the driver’s door is opened and closed. This does not indicate a malfunction.

Good-Bye Screen

The good-bye screen will be displayed under the following conditions.

• The driver’s door is opened after the ignition switch is put in the “OFF” position. . 3 minutes have passed after the ignition switch is put in the “OFF” position with the driver’s door closed.
• 10 minutes have passed when the hands-free phone is used after the ignition switch is put in the “OFF” position.
• The battery voltage is low when the ignition switch is put in the “OFF” position.

Interruption Screen

Useful messages, such as reminders, weather information (if equipped) and traffic information (if equipped) may interrupt the current screen and appear on the display accompanied by a beep. Take the proper action according to the message.

Touch Screen Operations

The center information display has a touch screen. Operations are performed by touching the touch screen directly.

TouchQuickly touch and release once.

DragTouch the screen and move the screen to the desired position.

SwipeQuickly move the screen by swiping with your finger.

NOTE
Swipe operations may not be performed smoothly in high altitudes.

11.6-Inch Display Models (If Equipped)

NOTE

For dual 7.0-inch display models, refer to “Dual 7.0-Inch Display Models”P235.

Touch screen

1. HOME icon (Refer to “HOME icon” P219.)
2. Status bar (Refer to “Status bar” P214.)
3. Information bar (Refer to “Information bar” P214.)
4. Main screen (Refer to “Main screen” P219.)
5. Driver profiles icon (Refer to “Driver profiles icon” P219.)
6. Climate control screen (Refer to “Climate control screen” P219.)
7. Car settings icon (Refer to “Car settings icon” P217.)
8. Auto Start Stop ON/OFF icon (Refer to “Auto Start Stop ON/OFF icon” P216.)
   While the ignition switch is in the “ACC” or “ON” position, the touch panel will activate.

Status bar

The outside temperature and clock are displayed on the status bar.

NOTE

• The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions.
  • While parking or driving at low speeds
  • When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel)
  • When starting the engine after being parked for a certain period of time
• The temperature unit cannot be changed.
• The clock can be displayed in either 12- hour display or 24-hour display. For details, refer to “Clock” P248.
  Touch the clock on the status bar to display the clock setting screen. Refer to “Clock” P248.
• For details about Bluetooth device information, refer to the navigation/audio Owner’s Manual.

Information bar

Swipe the information bar or touch or on the information bar to switch the item displayed.

Audio screen:

The screen of the currently selected audio source is displayed. For details about how to use the audio set, refer to the separate navigation/audio Owner’s Manual.

Navigation screen (models with navigation system): The directions to the destination are displayed on the screen.

NOTE
When a destination is not set in the navigation system, the compass orientation, street name and speed limit remain displayed on the screen.

Favorite screen: Favorite screen
This screen displays up to three optional pieces of information that can be selected from the following items.

Item	Details
	Engine coolant temperature
	Engine oil temperature
	Average vehicle speed
	Accelerator opening ratio
	Vehicle posture

Item	Details
	Direction of the vehicle*1
	Weather information for the next three hours*2
	Weather information for the next six hours*2
	Posted speed limit of the road you are currently driv- ing on*1
	Calendar
	Driver Monitoring System*1 information and the average fuel consumption of driver
	Nothing is displayed.

1. If equipped
2. Models with SiriusXM Satellite Radio

NOTE
Some items may not be shown depending on the model and specifications.
The items shown on the favorite screen can be changed. For details, refer to “Favorite Widgets” P229.

Weather information screen (if equipped): NOTE

• When all of the following conditions are satisfied, weather information is displayed.
  • The vehicle is equipped with an audio and navigation system for SiriusXM satellite radio.
  • The SiriusXM satellite radio subscription is active.
• The weather forecast for the set destination remains displayed until a new destination is set or until the destination is reached.
• Depending on the reception timing of XM, the weather information may be delayed.

X-MODE screen (Outback/Subaru Outback Wilderness): Models with 1 modeModels with 2 modes
X-MODE information is displayed on the screen.
Also, X-MODE can be switched to a different mode on the screen.

Main screen

For details about the following menu, refer to the separate navigation/audio Owner’s Manual.

• Radio
• Media
• Phone
• Map
• Apps
• My Subaru
• SUBARU STARLINK
• Add to Shortcut

Auto Start Stop ON/OFF icon

1. Auto Start Stop indicator (green)

Touching “ ” deactivates the Auto Start Stop system and turns off the Auto Start Stop indicator (green) on the screen. Touching “ ” again activates the Auto Start Stop system and turns on the Auto Start Stop indicator (green).

Car settings icon

Touchto display the items that are changeable while driving.

Item		Available settings	Page reference for the vehicle system operation	Page reference for the setting procedure
1st menu	2nd menu
Vehicle Control	Vehicle Dynamics Control	ON/OFF	363	228
	X-MODE*1	Models with 1 mode: ON/OFF Models with 2 modes: Normal, Deep Snow/Mud, Snow/ Dirt	365	228
	Auto Vehicle Hold (AVH)	ON/OFF	372	228
	Steering Responsive Headlights (SRH)	ON/OFF	258	228
	Cruise Control Accel- eration Characteris- tics	Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3 (Standard)/Lv.4 (Dy- namic)	*2	—
	Auto Start Stop	ON/OFF	379	228
Driving Assistance	Pre-Collision Braking	Setting ON/Setting OFF	*2	—
	Lane Departure Pre- vention Function	All Functions/Lane Departure Prevention Function Only/Warning Buzzer Only/OFF
	BSD/RCTA*1	ON/OFF	393	228
Others	Warning Volume	Min/Mid/Max	392, 406 and *2	—
	Units	km, km/h, Liter/ Miles, MPH, Gallon	175 and 203	228
	Driver Monitoring System*1	ON/OFF	408	228

1. If equipped
2. For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.

Driver profiles icon

Touch (driver profiles icon) to confirm the driver’s information. For details, refer to the separate navigation/audio Owner’s Manual.

HOME icon

Touch (HOME) to display the top menu.

Climate control screen

The climate control status is shown on the screen.

1. Set temperature indicator (driver’s side)
2. SYNC mode indicator
3. Climate control ON/OFF button
4. Airflow mode
5. Climate control mode
6. Air inlet selection
7. Customizable icon
8. Set temperature indicator (passenger’s side)
9. Front passenger’s seat heater/ventilation indicator (if equipped)
10. Fan speed indicator
11. Driver’s seat heater/ventilation indicator (if equipped)

When operating the climate control sys-tem, the main screen switches to the climate control screen. For details, refer to “Climate Control Panel” P283.

Main screen

To display the main screen, touch (HOME).
In this Owner’s Manual, the following settings will be explained. For details about other items, refer to the separate navigation/audio Owner’s Manual.

• “Settings” “General”
• “Settings” “Car”
• “Car Info”

General settings

Set the time and display general items.

1. Touch (HOME).
2. (Settings)
3. “General”
4. Select the preferred menu.

The setting adjustments to the following items can be manually changed to meet your personal requirements.

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Clock	Time Setting*1*2	AUTO/Manual	248	248
		Time Setting*3	Sync With Phone/Manual
		Time Zone*1	AUTO/Pacific/Mountain/Central/ Eastern/Atlantic/Newfoundland/ Hawaii/Alaska		228
		Daylight Saving Time*1	AUTO/ON (+1 hour)/OFF		228
		Clock Format	12H/24H		228
	Display	Display Off	Turn the screen off.	—	228
		Brightness Dial	ON/OFF	177	228
		Brightness/Contrast	Set and adjust the brightness and contrast of the display.	228	228
	Wi-Fi	Wi-Fi	ON/OFF	*6	—
		Connected to:	Select the registered devise.
		Available Wi-Fi Networks	Add
		Wi-Fi Protected Setup	PIN Setup/Push Button Setup
		Registered Wi-Fi Networks	—
	Wi-Fi Hotspot	—	ON/OFF	*7

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Reminder Screen	Maintenance	ON/OFF	212	228
		Birthday	ON/OFF		228
		Anniversary	ON/OFF		228
	Meter Screen	Gauge Initial Movement	ON/OFF	175	228
		Meter Information Screen	Eco Gauge/OUT TEMP/Clock/ Compass*4/Gas Range	205	228
		Turn by Turn Screen Interrup- tion*1	ON/OFF	208	228
	Camera	Rear Camera Delay Control	ON/OFF	384	228
		Steering Angle Lines	ON/OFF	386	228
	Climate Control	Customize Climate Button	A/C/MAX A/C/AUTO/Recirculation	292	228
	Language	—	English/Français/Español	203 and 211	228
	Tire Pressure Units*5	—	kPa/PSi	208	228
	Home Screen Short- cuts	—	ON/OFF	*6	228
	Welcome Screen	—	ON/OFF	205	228
	Goodbye Screen	—	ON/OFF	205	228
	Favorite Widgets	—	Set a favorite widget from the list.	214	229
	Birthday List	—	Set a birthday.	212	229
	Anniversary List	—	Set an anniversary day.	212	230

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting proce- dure
1st menu	2nd menu	3rd menu
General	Periodic Rest Notifica- tion*1	—	ON/OFF	*6	—
	Software Update	Update	Check if a new software update
		Automatically Check for Up- dates	ON/OFF
		Automatically Download Up- dates	ON/OFF
	SUBARU STARLINK Apps Recovery	—	OK/Cancel
	SUBARU STARLINK Auto Connect	—	ON/OFF
	Factory Data Reset	—	Reset/Cancel
	System Information	—	—
	Free/Open Source Software Information	—	—

1. Models with navigation system
2. Models with SUBARU STARLINK without navigation system
3. Models without SUBARU STARLINK or navigation system
4. Models without navigation system
5. If equipped
6. For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system.
7. For details, refer to the Owner’s Manual supplement for SUBARU STARLINK Safety and Security.

NOTE
Touch to display the explanation of the items.

Car settings

Perform the EyeSight system setting and vehicle setting.

1. Touch (HOME).
2. (Settings)
3. “Car”
4. Select the preferred menu.

The setting adjustments to the following items can be manually changed to meet your personal requirements.

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	EyeSight	Pre-Collision Braking	Setting ON/Setting OFF	*3	—
		Lane Departure Prevention Function	All Functions/Lane Departure Prevention Function Only/ Warning Buzzer Only/OFF
		Cruise Control Acceleration Characteristics	Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3 (Standard)/Lv.4 (Dynamic)
		Select Drive on Left/Drive on Right	Right Lane/Left Lane
		Lead Vehicle Acquisition Sound	ON/OFF
		Lead Vehicle Moving Monitor	ON/OFF
	EyeSight Assist Monitor	Red Indicator	ON/OFF
		Yellow Indicator	ON/OFF
		Green Indicator	ON/OFF
	Reverse Automatic Braking*1	Sonar Audible Alarm	ON/OFF	397	228

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	Driver Monitoring System*1	Driver Monitoring System	ON/OFF	408	228
		Repeat Facial Scan	Perform the user recognition.		230
		User Recognition	ON/OFF		228
		Automatically Retract Seat on Entry	ON/OFF		228
		Register User	Register the user.		230
		Update Seat and Mirror Posi- tion	Re-register the driver’s posi- tion.		230
		Delete Driver Position	Delete the registered driver’s position.		230
		Delete User	Delete the registered user.		230
		Delete All Users	Delete all registered users.		230
	Keyless Entry System	Audible Signal*1*2	ON/OFF	131 and 136	228
		Hazard Warning Flasher	ON/OFF	131 and 137	228
		Driver Door Unlock*1	Driver Door Only/All	124	228
		Rear Gate/Trunk Unlock*1	Rear Gate/Trunk Only/All	124	228

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	Defogger	—	15 minutes/Continuous	265	228
	Interior Light	—	10 seconds/20 seconds/30 seconds/OFF	307	228
	Auto Light Sensor	Light Sensitivity	Min/Low/Mid/Max	251	228
		Wiper Link	ON/OFF	252	228
	Welcome Lighting	Approaching Time Set	30 seconds/60 seconds/90 seconds/OFF	252	228
		Leaving Time Set	30 seconds/60 seconds/90 seconds/OFF		228
	One-Touch Lane Changer	—	ON/OFF	261	228
	Auto Door Lock/Unlock	Auto Door Lock	Vehicle Speed/Shift into or out of PARK*1/OFF	141	228
		Auto Door Unlock	Ignition OFF/Driver Door Open/ Shift into or out of PARK*1/OFF		228
	Rear Seat Reminder	—	ON/OFF	58	228
	Door Mirror Setting*1	Auto Electric Folding	ON/OFF	278	228
		Reverse Tilt	ON/OFF	276	228
	Power Rear Gate*1	Power Rear Gate Memory	ON/OFF	158	228
	Vehicle Dynamics Control	—	ON/OFF	363	228
	Auto Vehicle Hold (AVH)	—	ON/OFF	372	228

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car	Auto Start Stop	—	ON/OFF	379	228
	BSD/RCTA*1	—	ON/OFF	393	228
	X-MODE*1	—	Models with 1 mode: ON/OFF Models with 2 modes: Normal, Snow/Dirt, Deep Snow/Mud	365	228
	Steering Responsive Head- lights (SRH)	—	ON/OFF	258	228
	Warning Volume	—	Min/Mid/Max	392, 406 and *3	228
	Units	—	km, km/h, Liter/ Miles, MPH, Gallon	175 and 203	228

1. If equipped
2. This setting also works as the On/Off setting of the power rear gate buzzer for starting operation. However, you cannot change the warning buzzer setting for a detecting jam, etc.
3. For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.

NOTE
Touch to display the explanation of the items.

How to select items on the screen

ON/OFF setting Example
Touch the changing menu and select ON or OFF .

SelectingExample
Touch the preferred item.

How to set items on the screen

Brightness/Contrast

Set and adjust the brightness and contrast of the center information display.

NOTE
“Brightness” can only be adjusted when “Brightness Dial” is off. Refer to “General settings” P219.

1. Touch (HOME).
2. (Settings)
3. “General”
4. Display”
5. “Brightness/Contrast”
6. Drag to adjust the brightness and contrast.
   Touch “Default” to revert to the factory setting.

Favorite Widgets

The menu on the favorite screen can be customized.

1. Touch (HOME).
2. (Settings)
3. “General”
4. “Favorite Widgets”
5. Select the icon of the display position.
6. Select the display item.

Birthday List

If a birthday or anniversary is approaching, a message will be shown when the ignition switch is turned to the “ON” position. This function can be set to on or off by “Reminder Screen”. For details, refer to “General settings” P219.

1. Touch (HOME).
2. (Settings)
3. “General”
4. “Birthday List”
5. “Add”
6. Enter the name.
7. “Next”.
8. Enter the date.
9. “OK”

NOTE
A maximum of 5 birthdays can be stored.

Anniversary List

The procedure for setting an anniversary is the same as “Birthday List” P229, except that in step 4 “Anniversary List” is selected.

Driver Monitoring System (if equipped)

The Driver Monitoring System settings can be changed.
For setting method for the following menu on the Driver Monitoring System, refer to “ON/OFF setting” P228.

• Driver Monitoring System
• User Recognition
• Automatically Retract Seat on Entry

Repeat Facial Scan:

1. Touch (HOME).
2. (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Repeat Facial Scan”
6. “OK”
7. While seated in the driver’s seat, face forward and wait for a few moments. When the scan is completed, the completion screen is displayed on the combination meter (color LCD).

Register User:

1. Adjust the seat position, outside mirror angle, and reverse tilt-down outside mirror angle so that you are seated in the correct driving posture.
   NOTE
   • Start the user registration after adjusting the seat position, outside mirror angle, and reverse tilt-down outside mirror angle. If they are adjusted during user registration, it may be disrupted. Refer to “Power Seat” FP32 or “Out-side Mirrors” FP275.
   • If the ignition switch is turned to the “OFF” position before user registration is complete, the information of the adjusted seat position, outside mirror angles, and reverse tilt-down outside mirror angle will not be saved.
2. Touch (HOME).
3. (Settings)
4. “Car”
5. “Driver Monitoring System”
6. “Register User”
7. Select the preferred user from the list.
8. “Set”
9. While seated in the driver’s seat, face forward and wait for a few moments. When the screen changes, the registration of the facial scan is completed.
   1. A) Forward direction
   2. B) Display direction
      1. Face forward.
      2. Do not lower your chin.
      3. Face the display.
         *: Display
         NOTE
         • If user registration cannot be performed, turn your face forward as shown in the illustration, then turn to the display.
         • There are some cases where user registration cannot be registered properly. In those cases, refer to “Driver Monitoring System” P408.
         • If “Unable to register. Try again.” appears, repeat the procedure beginning from step 5.
10. Enter the name.
11. “Next”
12. Select the preferred icon.
13. “Set”

NOTE

• An existing user can be overwritten by selecting a registered number. When a user is registered by overwriting, the individual fuel economy data is reset.
• When “User Recognition” is set to OFF, user registration cannot be selected

Update Seat and Mirror Position

1. Touch (HOME).
2. (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Update Seat and Mirror Position”
6. “Set”

NOTE

• Start the user registration after adjusting the seat position, outside mirror angle, and reverse tilt-down outside mirror angle. If they are adjusted during user registration, it may be disrupted. Refer to “Power Seat” P32 or “Out-side Mirrors” P275.
• If the ignition switch is turned to the “OFF” position before user registration is complete, the information of the adjusted seat position, outside mirror angles, and reverse tilt-down outside mirror angle will not be saved.

Delete Driver Position:

1. Touch (HOME).
2. (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Delete Driver Position”
6. ? “Yes”

Delete User:

1. Touch (HOME).
2. (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Delete User”
6. 6. Select the preferred user from the list.
7. “Yes”

Delete All Users:

1. Touch (HOME).
2. (Settings)
3. “Car”
4. “Driver Monitoring System”
5. “Delete All Users”
6. “Yes”

Car information screen

1. Touch(HOME) to display the top menu.
2. (Car Info)

Driving Statistics screen Except for Subaru Outback Wilderness For Subaru Outback Wilderness

1. Driving Statistics
2. Steering angle
3. Running condition
4. Vehicle posture
5. Telltale screen

This screen displays the driving status of the vehicle and the operation status functions. For functions that are operating, the indicator will illuminate or flash.

NOTE

• The vehicle posture indication may differ from the actual vehicle posture. . For Outback/Subaru Outback Wilderness, when X-MODE has been turned on, the screen of the center information display will be changed to the X-MODE screen.
• The vehicle posture angle varies not only due to the angle of the road surface, but also due to the vehicle tilt caused by the occupants, cargo, and acceleration or deceleration.

Advanced Package screen

1. Advanced Package
2. Driver Monitoring System*1
3. Pre-Collision Braking
4. SD/RCTA*1
5. Reverse Automatic Braking (RAB) sys-tem*1
6. Information icon
7. Lane Departure Warning
8. EyeSight Assist Monitor
9. High beam assist
10. Front view monitor*1
    1. If equipped

This screen displays the advanced safety functions status of the vehicle.
Touch “Advanced Package” from the 2nd menu in the car info screen.
The advanced safety functions information can be shown on the screen. Touch the information icon on the screen.

NOTE

• Indicators and icons are not displayed for functions that are not equipped to the vehicle.
• The indicators and icons of functions that are not operating are displayed in gray.

Maintenance screen

Maintenance reminders can be set.

Engine Oil change reminder:

1. Touch “Maintenance” from the 2nd menu in the car info screen.
2. (Engine Oil)
3. Select “Notification Date” or “Notification Distance” of the reminder.
4. “Set”

Oil Filter change reminder:
The setting procedure is the same as the “Engine Oil” reminder, but touch the “Oil Filter” item in step 2.
Tires rotation reminder:
The setting procedure is the same as the “Engine Oil” reminder, but touch the “Tires” item in step 2.
Maintenance Schedule setting:
The setting procedure is the same as the “Engine Oil” reminder, but touch the “Maintenance Schedule” item in step 2.

NOTE

• Touch “Reset” to reset each setting. .
• ouch “Update” to revert to the default value.

Dual 7.0-Inch Display Models (If Equipped)

NOTE
For 11.6-inch display models, refer to “11.6-Inch Display Models” P213.

Main screens

• A) Upper display
• B) Lower display
  1. HOME button (Refer to “HOME button” P236.)
  2. Status bar (Refer to “Status bar” P236.)
  3. Upper main screen (Refer to “Setting of the upper display” P237.)
  4. Lower main screen (Refer to “Setting of the lower display” P240.)
  5. Climate control screen (Refer to “Climate control screen” P237.)

While the ignition switch is in the “ACC” or “ON” position, the touch panel will activate.

HOME button

Press (HOME) to display the top menu.

Status bar

The driver profiles icon, outside temperature and clock are shown on the display.

NOTE

• The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions.
  • While parking or driving at low speeds
  • When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel)
  • When starting the engine after being parked for a certain period of time
• The temperature unit cannot be changed.
• The clock can be shown in either 12-hour display or 24-hour display. For details about the setting, refer to “Clock” P248.
• Touch the clock on the status bar to display the clock setting screen. Refer to “Clock” P248.

Upper display

For details about items, refer to “Setting of the upper display” P237.
For details about the following menu, refer to the separate navigation/audio Owner’s Manual.

• Radio
• Media
• Phone
• Apps
• SUBARU STARLINK
• Add to Shortcut

Lower display

For details about the setting items, refer to “Setting of the lower display” P240.
If this screen changes to the climate control screen, refer to “Dual 7.0-Inch Display Models” P284.

Climate control screen

1. Airflow mode
2. Climate control mode
3. Air inlet selection
4. Set temperature indicator
5. Customizable icon
6. Fan speed indicator
7. Climate control On/Off button

When operating the climate control system, the main screen switches to the climate control screen. For details about climate control operation, refer to “Climate Control Panel” P283.

Setting of the upper display

In this Owner’s Manual, the settings of the “General” menu will be explained. For details about other items, refer to the separate navigation/audio Owner’s Manual.

General settings

The “General” menu is used to set the display, language and time.

1. Press (HOME).
2. Touch(Settings).
3. “General”
4. Select the preferred menu.

The setting adjustments to the following items can be manually changed to meet your personal requirements.

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
General	Clock	Time Setting	Sync With Phone/Manual	248	248
		Clock Format	12H/24H		249
	Display	Display Off	Turn the screen off.	—	245
		Brightness Dial	ON/OFF	—	245
		Brightness/Contrast	Set and adjust the brightness and contrast of the screen dis- play and camera display.	—	245
	Reminder Screen	Maintenance	ON/OFF	212	245
		Birthday	ON/OFF		245
		Anniversary	ON/OFF		245
	Meter Screen	Gauge Initial Movement	ON/OFF	175	245
		Meter Information Screen	Eco Gauge/OUT TEMP/Clock/ Gas Range	205	245
	Camera	Rear Camera Delay Control	ON/OFF	384	245
		Steering Angle Lines	ON/OFF	386	245

1. If equipped
2. For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system.

NOTE
Touch to display the explanation of the items.

Setting of the lower display

Touch (Car Settings). Refer to “Vehicle setting icons” P242.
This screen displays the driving status of the vehicle and the operation status of the functions. Refer to “Driving Statistics” P246.
Set the timing of the maintenance. Refer to “Maintenance” P247.

Vehicle settings while driving

Touch (X-MODE), (Vehicle Control), (Driving Assistance), (Others), or (Auto Start Stop) to display the items that are changeable while driving.

Item			Available settings	Page reference for the vehicle system operation	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
X-MODE*1	—	—	ON/OFF	365	245
Vehicle Con- trol	Vehicle Dynamics Control	—	ON/OFF	363	245
	Auto Vehicle Hold (AVH)	—	ON/OFF	372	245
	Cruise Control Acceleration Characteristics	—	Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3 (Standard)/Lv.4 (Dynamic)	*2	—
Driving As- sistance	Pre-Collision Braking	—	Setting ON/Setting OFF	*2	—
	Lane Departure Prevention Function	—	All Functions/Lane Departure Prevention Function Only/ Warning Buzzer Only/OFF
Auto Start Stop	—	—	ON/OFF	379	245
Others	Warning Volume	—	Min/Mid/Max	*2	245
	Units	—	km, km/h, Liter/ Miles, MPH, Gallon	175 and 203	245
	Auto Start Stop	—	ON/OFF	379	245

1. For Outback/Subaru Outback Wilderness
2. For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.

Auto Start Stop ON/OFF icon

1. Auto Start Stop indicator (green)

Touching “ ” deactivates the Auto Start Stop system and turns off the Auto Start Stop indicator (green) on the screen. Touching “ ” again activates the Auto Start Stop system and turns on the Auto Start Stop indicator (green).

Vehicle setting icons

1. Touch (HOME).
2. Touch (Car Settings).

The setting adjustments to the following items can be manually changed to meet your personal requirements.

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car Settings	EyeSight	Pre-Collision Braking	Setting ON/Setting OFF	*1	—
		Lane Departure Prevention Function	All Functions/Lane Departure Prevention Function Only/ Warning Buzzer Only/OFF	*1	—
		Cruise Control Acceleration Characteristics	Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3 (Standard)/Lv.4 (Dynamic)	*1	—
		Select Drive on Left/Drive on Right	Right Lane/Left Lane	*1	—
		Lead Vehicle Acquisition Sound	ON/OFF	*1	245
		Lead Vehicle Moving Monitor	ON/OFF	*1	245
	EyeSight Assist Monitor	Red Indicator	ON/OFF	*1	—
		Yellow Indicator	ON/OFF
		Green Indicator	ON/OFF
	Keyless Entry System	Hazard Warning Flasher	ON/OFF	137	245
	Defogger	—	15 minutes/Continuous	265	245
	Interior Light	—	10 seconds/20 seconds/30 seconds/OFF	307	245

Item			Available settings	Page reference for the vehicle system opera- tion	Page reference for the setting procedure
1st menu	2nd menu	3rd menu
Car Settings	Auto Light Sensor	Light Sensitivity	Min/Low/Mid/Max	251	245
		Wiper Link	ON/OFF	252	245
	Welcome Lighting	Approaching Time Set	30 seconds/60 seconds/90 seconds/OFF	252	245
		Leaving Time Set	30 seconds/60 seconds/90 seconds/OFF		245
	One-Touch Lane Changer	—	ON/OFF	261	245
	Auto Door Lock/Unlock	Auto Door Lock	Vehicle Speed/Shift into or out of PARK/OFF	141	245
		Auto Door Unlock	Ignition OFF/Driver Door Open/ Shift into or out of PARK/OFF		245
	Rear Seat Reminder	—	ON/OFF	58	245
	Vehicle Dynamics Control	—	ON/OFF	363	245
	Auto Vehicle Hold (AVH)	—	ON/OFF	372	245
	Auto Start Stop	—	ON/OFF	379	245
	X-MODE*2	—	ON/OFF	365	245
	Warning Volume	—	Min/Mid/Max	*1	245
	Units	—	km, km/h, Liter/ Miles, MPH, Gallon	175 and 203	245

1. For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
2. If equipped

NOTE
Touch to display the explanation of the items.

How to select items on the screen

ON/OFF setting

Example
Touch the changing menu and select ONor OFF

Selecting

Example
Touch the preferred setting.

How to set items on the screen

Brightness/Contrast

Set and adjust the brightness and contrast of the center information display.

NOTE
“Brightness” can only be adjusted when “Brightness Dial” is off. Refer to “General settings” P237.

1. Touch (HOME).
2. (Settings)
3. General”
4. “Display”
5. “Brightness/Contrast”
6. Drag to adjust the brightness and contrast.

Touch “Default” to revert to the factory setting.

Birthday List

If a birthday or anniversary is approaching, a message will be displayed when the ignition switch is turned to the “ON” position. This function can be set to on or off by the “Reminder Screen”. For details, refer to “General settings” P237.

1. Touch (HOME).
2. (Settings)
3. General”
4. “Birthday List”
5. “Add”
6. Enter the name.
7. “Next”
8. Enter the date.
9. “OK”

NOTE
A maximum of 5 birthdays can be stored.

Anniversary List

The procedure for setting an anniversary is the same as “Birthday List” FP246, except that in step 4 “Anniversary List” is selected.

Driving Statistics

1. Steering angle
2. Vehicle posture
3. Running condition

This screen displays the driving status of the vehicle and the operation status of the functions. For functions that are operating, the indicator will illuminate or flash.

NOTE

• The vehicle posture indication may differ from the actual vehicle posture. . For Outback/Subaru Outback Wilderness, when X-MODE has been turned on, the screen of the center information display will be changed to the X-MODE screen.
• The vehicle posture angle varies not only due to the angle of the road surface, but also due to the vehicle tilt caused by the occupants, cargo, and acceleration or deceleration.

Maintenance

Maintenance reminders can be set.

Engine Oil setting:

1. Touch (Maintenance).
2. (Engine Oil)
3. Select “Notification Date” or “Notification Distance” of the reminder.
4. “Set”

Oil Filter setting:

The setting procedure is the same as “Engine Oil” setting, but touch the “Oil Filter” item in step 2.

Tires setting:
The setting procedure is the same as “Engine Oil” setting, but touch the “Tires” item in step 2.
Maintenance Schedule setting:
The setting procedure is the same as “Engine Oil” setting, but touch the “Maintenance Schedule” item in step 2.

NOTE

• Touch “Reset” to reset each setting.
• Touch “Update” to revert to the default value.