2022 Subaru Outback Air Cleaner Element User Manual

2022 Subaru Outback Air Cleaner Element

Air Cleaner Element

WARNING
Do not operate the engine with the air cleaner element removed. The air cleaner element not only filters intake air but also stops flames if the engine backfires. If the air cleaner element is not installed when the engine backfires, you could be burned.

CAUTION
When replacing the air cleaner element, use a genuine SUBARU air cleaner element. If it is not used, there is the possibility of causing a negative effect on the engine.

The air cleaner element functions as a filter screen. When the element is perforated or removed, engine wear will be excessive and engine life shortened. The air cleaner element is a dry type. It is unnecessary to clean or wash the element

Replacing the Air Cleaner Element

Replace the air cleaner element according to the maintenance schedule in the “Warranty and Maintenance Booklet.” Under extremely dusty conditions, replace it more frequently. It is recommended that you always use genuine SUBARU parts

2.5 L models

1. Unsnap the two clips holding the air cleaner case (rear).
2. Open the air cleaner case and pull the cover rearward while lifting it up.
3. Remove the air cleaner element
4. If you find large foreign objects such as leaves inside the air cleaner case, remove the foreign objects
5. Install a new air cleaner element in the way the longitudinal side and the transverse side face as shown in the illustration
6. To install the air cleaner case (rear), insert the three projections on the air cleaner case (rear) into the slits on the air cleaner case (front).
7. Install in the reverse order of removal

CAUTION
If the inside of the air cleaner case is extremely soiled (for example, by sand), contact a SUBARU dealer and have the air cleaner case cleaned

2.4 L models

1. Unsnap the two clips holding the air cleaner case (rear).
2. Open the air cleaner case and pull the cover rearward while lifting it up.
3. Remove the air cleaner element.
4. If you find large foreign objects such as leaves inside the air cleaner case, remove the foreign objects.
5. Install a new air cleaner element in the way the longitudinal side and the transverse side face as shown in the illustration.
6. To install the air cleaner case (rear), insert the three projections on the air cleaner case (rear) into the slits on the air cleaner case (front).
7. Install the removed parts in the reverse order of removal.

CAUTION
If the inside of the air cleaner case is extremely soiled (for example, by sand), contact a SUBARU dealer and have the air cleaner case cleaned.