2022 Subaru Ascent Push-button ignition switch (models with “keyless access with push-button start system”) Owners Manual

2022 Subaru Ascent Push-button ignition switch (models with “keyless access with push-button start system”)

Push-button ignition switch (models with “keyless access with push-button start system”)

Safety precautions

Refer to “Safety precautions” P121.

Operating range for pushbutton start system

1. Antennas
2. Operating range

NOTE

• If the access key fob is not detected within the operating range of the antennas inside the vehicle, the push-button ignition switch and the engine start cannot be operated.
• Even when the access key fob is outside the vehicle, if it is placed too close to the glass, it may be possible to switch the power or to start the engine.
• Do not leave the access key fob in the following places. It may become impossible to operate the push-button ignition switch and the engine start. It may also cause a false warning to issue although no malfunction actually occurs, or not to issue a warning when any malfunction occurs.
  • On the instrument panel
  • On the floor
  • Inside the glove box
  • Inside the door trim pocket
  • On the rear seat
  • In the cargo area
• When operating the push-button ignition switch or starting the engine, if the access key fob battery is discharged, perform the procedure described in “Access key fob – if access key fob does not operate properly” FP430. In such a case, replace the battery immediately. Refer to “Replacing battery of access key fob” P480.

Switching power status

1. Operation indicator
2. Push-button ignition switch

The power is switched every time the push-button ignition switch is pressed.

1. Carry the access key fob, and sit in the driver’s seat.
2. Shift the select lever into the “P”/“N” position.
3. Press the push-button ignition switch without depressing the brake pedal. Every time the button is pressed, the power is switched in the sequence of “OFF”, “ACC”, “ON” and “OFF”. When the engine is stopped and the push-button ignition switch is in “ACC” or “ON”, the operation indicator on the push-button ignition switch illuminates in orange.

CAUTION

• When the push-button ignition switch is left in “ON” (while the engine is not running) or “ACC” for a long time, it may result in vehicle battery discharge.
• Do not spill drinks or other liquids on the push-button ignition switch. It may cause a malfunction.
• Do not touch the push-button ignition switch with a hand soiled with oil or other contaminants. It may cause a malfunction.
• If the push-button ignition switch does not operate smoothly, stop the operation. Contact a SUBARU dealer immediately.
• If the push-button ignition switch does not illuminate even when the instrument panel illumination is turned on, have the vehicle inspected at a SUBARU dealer.
• If the vehicle was left in the hot sun for a long time, the surface of the push-button ignition switch may get hot. Be careful not to burn yourself.

NOTE

• When operating the push-button ignition switch, firmly press it all the way.
• If the push-button ignition switch is pressed quickly, the power may not turn on or off.
• If the indicator light on the push-button ignition switch flashes in green when the push-button ignition switch is pressed, the steering is locked. When this occurs, press the push-button ignition switch while turning the steering wheel left and right.

Battery drainage prevention function

When the access key fob does not operate properly

Refer to “Access key fob – if access key fob does not operate properly” P430.