2022 Subaru Ascent Clock Owners Manual

2022 Subaru Ascent Clock

 

Clock

The clock can be adjusted using either auto mode or manual mode.

• Auto mode: Automatic clock adjustment.
• Manual mode: Manual clock adjustment.

CAUTION
The clock in the multi-function display (color LCD) cannot be adjusted, if the SUBARU genuine navigation and/or audio system is removed.

Setting the clock manually

Type A multi-function display (black and white)

1. Turn the ignition switch to “ON”.
2. Press the button.
3. Select “Settings”.
4. Select “Vehicle”.
5. Select “Time/Date” and then select “Manual”.
6. Press the “+” button or the “−” button beside the clock.

Setting 12-hour or 24-hour display

The clock can be set to a 12-hour or 24-hour display. Perform the following procedure to switch the display format.

1. Turn the ignition switch in the “LOCK”/ “OFF” position.
2. Press and hold the “−” button located near the clock display for approximately 5 seconds. The clock display will then start to flash.
3. While the clock display is flashing, press and hold the “+” button for approximately 2 seconds. The clock format will then change.
4. The clock display will continue to flash for approximately 3 seconds to indicate that the clock display has been changed.

Type B multi-function display (color LCD)

1. Turn the ignition switch to “ON”.
2. Press the button.
3. Select “Settings”.
4. Select “Vehicle”.
5. Select “Time/Date” and then select “Manual”.
6. Set each item plus and minus.
7. Select  to complete the clock setting.

Select “Back” to return to the previous screen without saving settings.

NOTE

• Adjust the time, then select 12h display or 24h display from the format.
• The Birthday/Anniversary and maintenance reminder system functions are based on the time and date on the multi-function display (color LCD).

Setting the clock automatically

1. Turn the ignition switch to “ON”. 
2. Press the button.
3. Select “Settings”.
4. Select “Vehicle”.
5. Select “Time/Date”.
6. Select “Auto”.

Models with navigation system
The clock will be set automatically where a GPS signal is available.

Models without navigation system
The clock will be set and adjusted automatically when a smartphone is connected via Bluetooth® for transferring phonebook data.

1. Register the smartphone to the audio system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system.
2. Transfer phonebook data to the system. For details, refer to “Bluetooth SET-TINGS” in the supplemental Owner’s Manual for the audio/navigation system. The clock will be adjusted automatically.

NOTE
Depending on the model of the smartphone, the settings of the connected smartphone may need to be changed.(ex: For iOS or other models, notification settings may need to be activated.) For details, check the instructions on connecting smartphones.

Regulatory information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.