The 120VAC power is most commonly provided to your recreational vehicle by either connecting the RV to an outside power source when parked or by using an RV generator. When the 120VAC system is operational, power also passes through a system power converter, allowing the full use of all 12VDC functions in the RV. Some 120VAC functions in the RV may include:
When not connected to 120VAC power, the 12VDC system functions can be supplied by the battery. Batteries are recharged by the power converter when the RV is attached to an outside 120VAC power source or by the generator. (Be sure you turn the power switch ON; the generator will not charge the batteries or otherwise operate when the power switch is in the OFF position.)
If equipped, an on-board inverter can also supply limited 120VAC power by utilizing, and converting the on-board batteries’ 12VDC power. See the inverter section of this manual for details.
NOTICE
Prior to supplying 120VAC power to the RV (generator or shore power), make sure all 120VAC appliances are turned OFF.
The 120VAC outlets in some possible wet locations are equipped with a protective circuit interrupter. The ground fault circuit interrupter (GFCI) is designed to break the flow of current to the protected outlet when an imbalance of current is detected. Imbalances include electrical leakage in an appliance, such as a shaver or hair dryer, that has developed a weak spot in electrical insulation. The possibility of electrocution exists when using a faulty appliance while at the same time being in contact with an electrical ground, such as water, plumbing, or the earth.
If an imbalance is detected, the GFCI will trip and shut off power to the outlet. Even with GFCI protection, the electrical shock will still be felt, but to a lesser degree. It also does not protect against short circuits or system overloads. Circuit breakers in the main panel, which supply power to the circuit, will trip if either of these conditions exists. The GFCI receptacle should be tested initially when the recreational vehicle is purchased and at least monthly thereafter.
To test the circuit, use the following procedure:
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…