2023 Polestar 2 Rearview and Door Mirrors Owner’s Manual

The joystick in the drivers’ door control panel is used to adjust the position of the door mirrors. The vehicle’s electrical system must be active.

Automatically folding door mirrorsThe door mirrors can be automatically folded when driving or parking in tight spaces.

Open the mirrors by pressing L and R at the same time. The mirrors will automatically stop when they reach the last-used setting.

Restoring to original positionA mirror that has been moved out of position manually (e.g. hit or bumped into) must be electrically returned to its original position for automatic folding to function properly.

The mirrors return to their original positions.

Tilting when parkingThe door mirrors can be tilted down to help give the driver a better view along the sides of the vehicle, e.g. of the curb when parking.

Please note that the button may need to be pressed twice depending on settings. When the door mirror is tilted down, the light in the button will flash. When reverse gear is disengaged, the door mirrors automatically return to their original positions.

Automatically tilting when parkingWith this setting, the door mirrors will automatically tilt down when reverse gear is engaged. The folded position is preset and cannot be adjusted.

To immediately return the door mirrors to their original position, press the L or R button twice.

Automatic folding when the vehicle is lockedThe door mirrors fold in/out automatically when the vehicle is locked/unlocked using the key.

NOTE

If you manually fold in the mirrors using the L and R buttons and then lock the vehicle, they will not fold out automatically when you unlock the vehicle, even if this preference has been set. Folding must then be done manually or while driving once the vehicle has reached a certain speed.

Adjusting the rearview mirror dimming function*

Auto-dim*

Bright light from behind is automatically* dimmed by the rearview mirror and door mirrors when it is dark outside or in limited light conditions, such as when driving in tunnels. In the center display, you can set whether auto-dim should be active or not active while driving.

Dimming is adjusted automatically, via light sensors in the rearview mirror, for both the rearview mirror and door mirrors.

• Tap in the center display.

• Tap More.

• Tap Mirrors and select the desired setting.

NOTE

If the sensors are obstructed by e.g. a parking permit, transponder, sunshade or objects on the seats or parcel shelf in a way that prevents light from reaching the sensors, the auto-dim function in the rearview and door mirrors will be reduced.

HomeLink^®*

HomeLink^® is a programmable remote control integrated in the vehicle’s electrical system.

It can remotely control up to three different devices, such as garage door openers or alarm systems, and thereby replace the remote controls for these.

1. Programmable buttons
2. Indicator light

HomeLink^® is integrated in the rearview mirror and consists of three programmable buttons and an indicator light in the mirror.

NOTE

• Save the original remote controls for future reprogramming (e.g. for use in another vehicle).
• It is also advisable to delete the button programming if the vehicle is sold.

More informationVisit homelink.com or call 1-800-355-3515.

Rearview/door mirrors

The rearview mirror and door mirrors can be used to improve the driver’s visibility behind the vehicle.

Rearview mirror

The rearview mirror can be adjusted manually.
The rearview mirror is equipped with HomeLink* and automatic dimming*.

Door mirrors

The power door mirrors have a wide-angle field in the outer edge of the mirrors to provide better visibility of objects in the vehicle’s blind spot.

WARNING

• The door mirror on the passenger side is curved to improve visibility. Objects in the mirror may appear farther away than they actually are.
• The joystick in the drivers’ door control panel is used to adjust the position of the door mirrors. There are also several automatic settings that can also be connected to the memory function buttons for the power seat.

Storing seat and door mirror positions

The memory buttons can be used to store positions for power seats and door mirrors.

Store two different positions for the power seat and the door mirrors using the memory buttons. The buttons are located on the inside of either one or both front doors.

1. Button M for storing a setting.
2. Memory button.
3. Memory button.

Storing positions

• Adjust seat and door mirrors to the desired position.

• Press and hold the M button. The indicator light in the button will illuminate.

• Within three seconds, press and hold the 1 or 2 buttons.

> When the position has been stored in the memory button, an audio signal will sound and the indicator light in the M button will go out.

If none of the memory buttons are pressed within three seconds, the M button will go out and no position will be stored.
The seat or door mirrors must be readjusted before a new memory position can be set.

Using the stored seat and door mirror positions

If the positions for the power seat and door mirrors have been stored, they can be activated using the memory buttons.

Using a stored position

To use a stored position, press and hold one of the memory buttons 1 (2) or 2 (3) until the seat reaches the stored position.

Releasing the memory buttons will stop the movement of the seat and door mirrors.

WARNING

• Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
• Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
• Do not adjust the seat while driving.
• The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
• The seat rails on the floor must not be obstructed in any way when the seat is in motion.